Question Custom Tuning Settings Resetting

[ChrisB85]

Hi guys, I recently undervolted and overclocked my GPU using AMD's Andrenalin software, however every time I restart my PC or shut it down, the custom settings revert back to what they were originally, and I have to load the custom profile every single time I startup. After searching on Google, I've seen people suggesting to turn off Fast Startup and to uninstall MSI Afterburner, but neither of these options have worked for me. I have the latest GPU and BIOS drivers installed, and I'm not sure what else to try - any ideas? I'm running an RX 5700 XT GPU and a Ryzen 7 3700X CPU.

 

[Order 66]

Hi guys, I recently undervolted and overclocked my GPU using AMD's Andrenalin software, however every time I restart my PC or shut it down, the custom settings revert back to what they were originally, and I have to load the custom profile every single time I startup. After searching on Google, I've seen people suggesting to turn off Fast Startup and to uninstall MSI Afterburner, but neither of these options have worked for me. I have the latest GPU and BIOS drivers installed, and I'm not sure what else to try - any ideas? I'm running an RX 5700 XT GPU and a Ryzen 7 3700X CPU.

That is what it is designed to do. setting to auto-apply on boot is not recommended because of the possibility of going into a boot loop if the settings are unstable.

 

[ChrisB85]

Ah okay, thanks for that! Is there a way to override the default settings? I've been running the custom tuning profile for around 10 days now and have had absolutely no problems.

 

[Zerk2012]

Ah okay, thanks for that! Is there a way to override the default settings? I've been runnings the custom tuning profile for around 10 days now and have had absolutely no problems.

You should be able to do the same thing in MSI Afterburner and make it active at startup.
I don't use AMD software so no clue on it.

 

[ChrisB85]

I've managed to get everything setup using MSI Afterburner, however I'm still having the same issues with the settings not being applied after a restart. I've made sure it starts with Windows, and have also checked the blue Windows icon in the top right to 'Apply at Windows Startup' but it's still not having it, I'm so confused.

When MSI Afterburner starts up it appears that my custom settings are there, but if I check what they actually are in GPU-Z they are still set to default.

 

[ChrisB85]

I uninstalled the Gigabyte Control Centre software and everything seems to be working as it should now! 🙂