B bennykpascal Prominent Dec 17, 2017 9 0 510 Dec 17, 2017 #1 DDR3 1600 two 8 Gb ram total 16 GB causing Memory dump, Bios there is only 1400 as max speed if i remove one stick then it is fine.
DDR3 1600 two 8 Gb ram total 16 GB causing Memory dump, Bios there is only 1400 as max speed if i remove one stick then it is fine.
Solution G G GhislainG Dec 17, 2017 You don't need to create several posts for the same issue: http://www.tomshardware.com/answers/id-3594631/add-ddr3-1600-8gb-ram-h81m-asus-motherboard-bios-settings.html http://www.tomshardware.com/answers/id-3594427/h81m-asus-mother-board-ddr3-1600-16gb-ram-totaly-unstable.html
You don't need to create several posts for the same issue: http://www.tomshardware.com/answers/id-3594631/add-ddr3-1600-8gb-ram-h81m-asus-motherboard-bios-settings.html http://www.tomshardware.com/answers/id-3594427/h81m-asus-mother-board-ddr3-1600-16gb-ram-totaly-unstable.html
G GhislainG Titan Jul 16, 2008 23,962 5 74,965 Dec 17, 2017 #2 Each module works fine? They are identical, i.e., they were bought as a kit? Upvote 0 Downvote
G GhislainG Titan Jul 16, 2008 23,962 5 74,965 Dec 17, 2017 Solution #3 You don't need to create several posts for the same issue: http://www.tomshardware.com/answers/id-3594631/add-ddr3-1600-8gb-ram-h81m-asus-motherboard-bios-settings.html http://www.tomshardware.com/answers/id-3594427/h81m-asus-mother-board-ddr3-1600-16gb-ram-totaly-unstable.html Upvote 0 Downvote Solution
You don't need to create several posts for the same issue: http://www.tomshardware.com/answers/id-3594631/add-ddr3-1600-8gb-ram-h81m-asus-motherboard-bios-settings.html http://www.tomshardware.com/answers/id-3594427/h81m-asus-mother-board-ddr3-1600-16gb-ram-totaly-unstable.html
B brispuss Splendid Dec 27, 2014 2,607 26 26,490 Dec 17, 2017 #4 These two modules are presumably NOT from the same dual channel memory kit(?) If so, then inter-module incompatibility is most likely the cause. This also applies for individual modules with the same brand and part number. Try increasing DRAM Voltage by 0.05 V. Upvote 0 Downvote
These two modules are presumably NOT from the same dual channel memory kit(?) If so, then inter-module incompatibility is most likely the cause. This also applies for individual modules with the same brand and part number. Try increasing DRAM Voltage by 0.05 V.