DDR3 1600MHz with 1.4 voltage

[dsmax_s]

Hello,

Wouldn't be problem if I set DRAM Voltage: 1.4, and I do not overclocking CPU (36x100Mhz), please?
Timings: 10-10-10-28-1

Original DRAM specs:
KHX1600C9D3/4G,
JEDEC standard 1.5V (1.425V ~ 1.575V) Power Supply
JEDEC standard 1.5V (1.425V ~ 1.575V) Power Supply

Best,
Max

 

[CountMike]

Why, do you have MB and CPU requiring "L" memory ? You'd probably have to slow RAM down to work at lower than specified voltage.

 

[dsmax_s]

Because all RAM's does not run if I set over 1.35v.

 

[CountMike]

Tam you probably need "L" (1.35v)RAM because your MB demands it.

 

[dsmax_s]

So, would it be problem to my Machine, please?

 

[CountMike]

As I said, you will have to lower RAM frequency for it to work properly but it will not harm the rest of your system if that's your concern.

 

[dsmax_s]

Thanks a lot for your answers, appreciate that.

 

[dsmax_s]

As I said, you will have to lower RAM frequency for it to work properly but it will not harm the rest of your system if that's your concern.

I would like to know if I set RAM Frequency: 1333MHz with 1.35 voltage so is that configuration good/healthy to my RAM's and my machine life's, please?