DDR3 2133 issues?

[Enthrone420]

Hey guys I got some G.SKILL Ripjaws X Series 8GB 2133mhz ram about a year ago and popped it into my ASUS P8Z77-V LK with a i5-3570. I didn't notice for the first 8 months that my ram was under clocked for some reason so I chucked it up to 2133 and now I'm having all sorts of issues like certain games crashing aka WoW while others run stable like Bioshock Infinite. I am starting to think I was mistaken for assuming that it was supposed to be clocked at 2133 or maybe its conflicting with my mobo or cpu any idea's?

The model number for the ram is Model F3-17000CL9D-8GBXM if that helps.

 

[spp85]

Hey guys I got some G.SKILL Ripjaws X Series 8GB 2133mhz ram about a year ago and popped it into my ASUS P8Z77-V LK with a i5-3570. I didn't notice for the first 8 months that my ram was under clocked for some reason so I chucked it up to 2133 and now I'm having all sorts of issues like certain games crashing aka WoW while others run stable like Bioshock Infinite. I am starting to think I was mistaken for assuming that it was supposed to be clocked at 2133 or maybe its conflicting with my mobo or cpu any idea's?

The model number for the ram is Model F3-17000CL9D-8GBXM if that helps.

Are you selected 2133 mhz by using XMP profile instead of the ASUS D.O.C.P mode ?? If not try selecting the 2133mhz speed by XMP profile. If its still not stable you try lower speeds like 2000mhz or1866mhz and check stability using Prime95 for a few hours .

 

[Enthrone420]

ok so I am still having problems and I found this.

G.Skill Ripjaws X Series 8GB (2 x 4GB) DDR3-2133 Memory operating voltage of 1.65V exceeds the Intel Ivy Bridge CPU recommended maximum of 1.5V+5% (1.575V). This memory module may run at a reduced clock rate to meet the 1.5V voltage recommendation, or may require running at a voltage greater than the Intel recommended maximum.

What should I do?

 

[sweenytodd]

Do not worry with that voltage. Ivy Bridge likes memory scaling. http://www.anandtech.com/show/6372/memory-performance-16gb-ddr31333-to-ddr32400-on-ivy-bridge-igp-with-gskill

Here they run it at 2400MHz at 1.65V

I have a i5 4670K with GSkill Trident X 2400MHz 8GB and it runs great at 1.67V

 

[Agiel]

i got a problems here, i have a Asus P8Z77-V LK with latest BIOS update ... 3570K oc to 4.0Ghz (mild oc i know) i have this rams G.Skill ARES F3-2400C11D-8GAB 2x 4GB DDR3 and when i aneable X.M.P it set voltages to 1.65V, Speed to 2400Mhz and latencys to 11-13-13-31 2T ok averything is fine untill i try to boot to windows wich take lake hell to get into windows, why is that ? i set rams ti 1600 and 1.50v and boot like 10 segs ... what im doing wrong ? im using Windows 8.1 Pro 64B btw ...

 

[Agiel]

i noticed now when letting all power saving options to "Auto" that system booted normally even at 2400Mhz, but i want power saving options so y let all of then "auto" and set C1E to enabled and wala, till now it's ok, if anything go wrong i will post here.