[SOLVED] DDR3 2133MHz shown in task manager only

[forum1111]

Why task manager shown ram frequency different from cpu-z? what is actual mhz of my ram?

 

[COLGeek]

Looks like it is running at 2133.

What are the specs for this system (make/model of all components)?

 

[forum1111]

xpm is enable, ultra ram profile also. frequency is set to 2133

 

[Deleted member 14196]

The fact is they both showed he same speed. 1066.9×2 is approximately 2133

 

[COLGeek]

You have to double the speed reported in CPU-Z to get the actual number (common misunderstanding). So 1066x2=2133

 

[forum1111]

mainboard support max 1600 MHz. Still it is show as the low and default level - 1066MHz.
The ram is dual channel. Video cart is internal, this mean get some ram/cpu, etc...

Ram support max 2133

Looks like it is running at 2133.

What are the specs for this system (make/model of all components)?

 

[forum1111]

Can you explain to me as amateur ? I do not understand why some app separate ram value compared to windows task manager ram speed value

The fact is they both showed he same speed. 1066.9×2 is approximately 2133

You have to double the speed reported in CPU-Z to get the actual number (common misunderstanding). So 1066x2=2133

 

[COLGeek]

What is the actual make/model of your memory?

 

[forum1111]

What is the actual make/model of your memory?

 

[dorsai]

https://www.techopedia.com/definition/5276/double-data-rate-ddr

 

[COLGeek]

Not really answering the question. On the memory itself, there is a label with the info. Also, CPU-Z (using the SPD tab) will provide the info.

 

[forum1111]

Not really answering the question. On the memory itself, there is a label with the info. Also, CPU-Z (using the SPD tab) will provide the info.

 

[forum1111]

is it a problem with slots 2 & 4 current I use?

 

[COLGeek]

The motherboard manual should tell you the preferred slots to use (2 and 4, correction: 1 & 2):

https://download.gigabyte.com/FileList/Manual/mb_manual_ga-z77x-ud5h_e.pdf

Looks like your memory supports the overclocked speed of 2133 and that is what your system is showing as the speed. Seems that part is okay.

Are you having issues otherwise?

 

[forum1111]

dual channels are ram slots (4 and 3) or (2 and 1).
2 and 4 are not dual channel.
i am using now 4-3

In manual not any information for "preferred slots numbers". At least I can not find.

Well, if task manager speed value is correct one. Then everything is OK. Thanks.

The motherboard manual should tell you the preferred slots to use (2 and 4, correction: 1&2):

https://download.gigabyte.com/FileList/Manual/mb_manual_ga-z77x-ud5h_e.pdf

Looks like your memory supports the overclocked speed of 2133 and that is what your system is showing as the speed. Seems that part is okay.

Are you having issues otherwise?

 

[COLGeek]

See page 16. I stand corrected. Slots 1 & 2 (see notes bottom of page).