DDR3 Compatability | Intel P35/G33/G31

[Fadi Albouchi]

Can I put some DDR3 ram on this bad boy or not?
If so what's the max capacity of the ram I can put on it and for the love of god don't even tell me to change the motherboard.

Chipset
-------------------------------------------------------------------------

Northbridge Intel P35/G33/G31 rev. 0A
Southbridge Intel 82801GB (ICH7/R) rev. A1
Graphic Interface PCI-Express
PCI-E Link Width x16
PCI-E Max Link Width x16
Memory Type DDR2
Memory Size 1024 MBytes
Channels Single
Memory Frequency 332.5 MHz (3:5)
CAS# latency (CL) 5.0
RAS# to CAS# delay (tRCD) 5
RAS# Precharge (tRP) 5
Cycle Time (tRAS) 15
Row Refresh Cycle Time (tRFC) 44
Command Rate (CR) 2T
MCHBAR I/O Base address 0x0FED14000
MCHBAR I/O Size 4096

 

[das_stig]

Chipset supports DDR2-667 / DDR2-800 / DDR3-800 / DDR3-1066, up to 8GB.
This depends on what memory type the motherboard manufacturers has implemented, will need its model number.

 

[Fadi Albouchi]

Chipset supports DDR2-667 / DDR2-800 / DDR3-800 / DDR3-1066, up to 8GB.
This depends on what memory type the motherboard manufacturers has implemented, will need its model number.

Here you go friend.

 

[das_stig]

Is this a Fujitsu-Siemens system or Acer?

 

[Fadi Albouchi]

Is this a Fujitsu-Siemens system or Acer?

It's a Fujitsu Siemens

 

[das_stig]

DDR2-667/800/1066

Here you go, generic specs. PDF.

http://www.msc-ge.com/download/itmain/datasheets/fsc/ds_d2750-A_preliminary.pdf

 

[Legohouse]

It's a Fujitsu Siemens

If you need compatible memory then check out the below link:
http://www.memorystock.com/memory/FujitsuD2750AMainboardDDR2800MHz.html

Good luck!!