Bit confused about ram speed,
the 1075t states maximum ram speed of 1333Mhz, im presuming thats the no overclocked rate of 200Mhz FSB .
So i purchased this speed ram thats its in the QVL for my mobo, Thing is i cant seem to push past 3.8Ghz without BSOD (blue screening in Prim95 in like a second) or the DRAM light coming on the mobo. Ive tried over and under clocking .
I noticed other people with this CPU for OC past 4Ghz are using faster ram. So should i get faster ram like 1600Mhz? or is something else going wrong? any help would be greatly appreciated.
SYSTEM
-----------------------------------
MOBO: ASUS M5A97
CPU: AMD 1075T (non black edition)
RAM: G.SKILL RIP JAWS DDR3 1333MHz 9-9-9-24 1.5V
-----------------------------------
* disabled all features such as turbo core, spread spectrum etc.
* set ram timings- 9 9 9 24
* set CPU and Ram voltages both to 1.5V
* set set Ram frequency to the lowest ratio, ends up being about 1080Mhz
* set HT and NB freq to be closest to 2000Mhz, from the options available ends up being about 1890Mhz
Everything else is pretty much Auto
the 1075t states maximum ram speed of 1333Mhz, im presuming thats the no overclocked rate of 200Mhz FSB .
So i purchased this speed ram thats its in the QVL for my mobo, Thing is i cant seem to push past 3.8Ghz without BSOD (blue screening in Prim95 in like a second) or the DRAM light coming on the mobo. Ive tried over and under clocking .
I noticed other people with this CPU for OC past 4Ghz are using faster ram. So should i get faster ram like 1600Mhz? or is something else going wrong? any help would be greatly appreciated.
SYSTEM
-----------------------------------
MOBO: ASUS M5A97
CPU: AMD 1075T (non black edition)
RAM: G.SKILL RIP JAWS DDR3 1333MHz 9-9-9-24 1.5V
-----------------------------------
* disabled all features such as turbo core, spread spectrum etc.
* set ram timings- 9 9 9 24
* set CPU and Ram voltages both to 1.5V
* set set Ram frequency to the lowest ratio, ends up being about 1080Mhz
* set HT and NB freq to be closest to 2000Mhz, from the options available ends up being about 1890Mhz
Everything else is pretty much Auto