DDR3L into DDR3 Slot

mdmorshed65

Reputable
Nov 30, 2015
2
0
4,510
Hello. I have a Dell Inspiron N4050 laptop which have a Ram installed DDR3 2GB 1333Mhz which run by 1.5v. My question is can I add a DDR3L 1600mhz Ram in the other empty ram slot and run them together? Iz there any way for that. Please help.
 
Solution
It could be a bad stick. I could be incompatibility between them. It could be that you knocked a cable loose when you opened things.
Try running either the windows memory diagnostic or memtest86. These should show if your RAM is running at the correct speeds and find any errors. If there are any errors, you should get the stick replaced.
I put the ram together . The system started fine but after sometime the system hang and the screen become white stripen . I tried to edit the voltage and bus setting in the bios but as dell bios are locked so I couldnt. What can be the possible problem ? Also if I only insert the DDR3L 4gb 1600 bus ram the system becomes hang after sometime. 🙁
 
It could be a bad stick. I could be incompatibility between them. It could be that you knocked a cable loose when you opened things.
Try running either the windows memory diagnostic or memtest86. These should show if your RAM is running at the correct speeds and find any errors. If there are any errors, you should get the stick replaced.
 
Solution