Deepcool Dukase PSU installing, need help!

Reisengof

Commendable
Aug 1, 2016
5
0
1,510
Hey everyone , i got a problem . I bought a Deepcool Dukase and Corsair RM750x PSU but PSU lenght is 180mm , Deepcool Dukase PSU supports only 170mm , so i need to cut some of the metal off or does it still fit? Does anyone have had same problem?

This week should the case arrive to me .
 
Solution
As it says there is only enough room for 170mm, there is normally a bit of extra room, so the PSU should fit. However, cutting the metal off would be a bit inappropriate, as this would most likely cut into the circuit board its self, and could risk electrocution.

If you have already purchased both, then it would most likely be a good idea to wait and see. There is normally a bit of extra breathing room! :)

Hope I helped

- xFeaRDom
As it says there is only enough room for 170mm, there is normally a bit of extra room, so the PSU should fit. However, cutting the metal off would be a bit inappropriate, as this would most likely cut into the circuit board its self, and could risk electrocution.

If you have already purchased both, then it would most likely be a good idea to wait and see. There is normally a bit of extra breathing room! :)

Hope I helped

- xFeaRDom
 
Solution
Lets wait and see , yeah ive readed that they got a little more space there . Ill let you know if i get it and hopefully it fit. In this forum one guy did really fit the 180mm PSU just the cable management was tighten 😀

Well see , thanks for answering!

Greetings from Estonia!