Deepcool Iceblade 100 for Q6600?

[mwalker9888]

I was wondering if that cooler would be enough for a Core 2 Quad Q6600. I'm putting together a spare parts build and this is the only cooler I have lying around. The Deepcool site says it can handle the 95w version but mine is the 105w variant if I remember correctly. My motherboard doesn't support overclocking so it will be at stock speeds.

http://www.deepcool.com/product/cpucooler/2013-12/7_514.shtml

 

[WildCard999]

I've run the Q6600 off of the stock cooler and I would think that Deepcool would be more efficient, try it out and just monitor the temps via HWmonitor.
https://www.cpuid.com/softwares/hwmonitor.html

 

[liketomoevit]

I have a Q6600 G0 clocked at 2.8GHz and use a the old Deepcool Gammaxx 200. It has direct contact dual heatpipes and a 92mm fan. I have 2X 120mm case fans and 2X 80mm case fans. At an ambient of approx 22C, my idle temps are 36C and my load temps are right around 60C. The 92mm fan is fairly quiet even at higher rpms. The Iceblade 100 should be just fine especially if your only going to be running stock clocks.