[SOLVED] Deepcool RF120M

[jairusnavalta]

Hi, iam planning to buy two sets of 3-in-1 Deepcool RF120M fans which means I will have 6 fans and 2 fan hubs.
My motherboard is a B450m-A so how can I make all the fans work when mboard only has 1 x 4-pin rgb header, and 1 fan hub can only accomodate 4 fans ?

 

[JohnBonhamsGhost]

you'll need a bigger single fan hub.

or calculate the power drawn by the two hubs and see if a single header can handle both of them on a splitter.

how can I make all the fan work? My mboard only have 1 4pin rgb header?

a fan's 4pin PWM motor control cable is not the same as a 4pin RGB cable.

are you trying to connect both PWM & RGB cables?

you will have to provide a link here to both the fans and the hubs for any definitive answer.

 

[jairusnavalta]

Here is the deepcool fan.
https://www.deepcool.com/product/CaseFans/2018-09/2420_9533.shtml

And here is my motherboard

PRIME B450M-A｜Motherboards｜ASUS Global

ASUS Prime series is expertly engineered to unleash the full potential of AMD and Intel processors. Boasting a robust power design, comprehensive cooling solutions and intelligent tuning options, Prime series motherboards provide daily users and DIY PC builders a range of performance tuning...

www.asus.com

Yes, i belive that the fan motor will run thru the 4 pin PWM and the RGB led will run thru the 4pin rgb via the fan hub. I have read that my header is 3a 12v and the led current is of a single fan is .12amp

Mboard headers
https://drive.google.com/file/d/12eCmPhIhaEIxjf81tnZWux_FMLS5YGtc/view?usp=drivesdk

Deepcool fan
https://drive.google.com/file/d/12gd1USbJ12RSMvq1sS1Cfrh7OMkmuYlm/view?usp=drivesdk

 

[JohnBonhamsGhost]

the fans use 4pin PWM & 4pin RGB.
and the motherboard has one of each available.

the easiest solution would probably be to get a single fan\RGB hub that will allow all 6 fans to be connected and controlled simultaneously.
a hub with a PWM and a RGB out cable would be the best.
this way you can use ASUS software to sync everything together.

or you could go for a Corsair Node type hub that will allow all of the fans to be connected and controlled via the iCUE software.

your Google links seem to be blocked to the public.