Hey guys, I got a Seagate Exos 16TB Enterprise HDD from Newegg but with it installed, my PC will not go past the initial screen where it asks to "Hit DEL or F2 to enter BIOS". Normally waiting here for a few seconds without going into BIOS will just start Windows but it's just stuck there. Also hitting DEL or F2 does not do anything.
There is also this kind of low repeating beeping noise coming from it. I switched out the SATA power cable with another one that was powering my Samsung EVOs and same results.
One other thing is that the debug Q-Code on my mobo shows "64" which according to the Q-code table 63 - 67 all means "CPU DXE initialization is started". Not sure what that means.
My specs:
Asus X570 Crosshair dark hero
Ryzen 7 5800X
Seagate Firecuda 520 NVME 1TB (OS)
Seagate Firecuda 520 NVME 2TB
2x Samsung 860 EVO 1TB (raid0)
Asus rog strix RTX 3090
Seasonic Prime TX-1000
Seems defective to me? Should I RMA it?
Thanks for any help!
There is also this kind of low repeating beeping noise coming from it. I switched out the SATA power cable with another one that was powering my Samsung EVOs and same results.
One other thing is that the debug Q-Code on my mobo shows "64" which according to the Q-code table 63 - 67 all means "CPU DXE initialization is started". Not sure what that means.
My specs:
Asus X570 Crosshair dark hero
Ryzen 7 5800X
Seagate Firecuda 520 NVME 1TB (OS)
Seagate Firecuda 520 NVME 2TB
2x Samsung 860 EVO 1TB (raid0)
Asus rog strix RTX 3090
Seasonic Prime TX-1000
Seems defective to me? Should I RMA it?
Thanks for any help!