Question Desktop BIOS Beep Only On 2nd Boot

Jan 27, 2021
2
0
10
0
Below is my machine's hardware information on speccy profile.

http://speccy.piriform.com/results/oTGtNCwmvRrxKFEUnWl7gVe

When I press the power button on my desktop it turns on and I see the LED indicators ON and cpu fan spinning and no display. Within few seconds it turns off completely and then it turns on automatically, then it gives BIOS single beep and shows BIOS POST and boots windows 7 operating system.

I tried replacing the PSU to check if it was a problem related to PSU, but still the problem exists with another working PSU. I disconnected my hard disks and then tried to power on the desktop but still the problem occurs.

This behavior has damaged one of my HDD which is giving a sand grinding noise. So I removed that HDD from pc. Another HDD has started to make some water boiling or crackling noise but it is still working.
 
Below is my machine's hardware information on speccy profile.

http://speccy.piriform.com/results/oTGtNCwmvRrxKFEUnWl7gVe

When I press the power button on my desktop it turns on and I see the LED indicators ON and cpu fan spinning and no display. Within few seconds it turns off completely and then it turns on automatically, then it gives BIOS single beep and shows BIOS POST and boots windows 7 operating system.

I tried replacing the PSU to check if it was a problem related to PSU, but still the problem exists with another working PSU. I disconnected my hard disks and then tried to power on the desktop but still the problem occurs.

This behavior has damaged one of my HDD which is giving a sand grinding noise. So I removed that HDD from pc. Another HDD has started to make some water boiling or crackling noise but it is still working.
have you tried restoring your bios to default settings and making sure your bios is fully up to date?
 
Reactions: CountMike

ASK THE COMMUNITY

TRENDING THREADS