I have a custom built PC, where I have recently started getting some annoying errors, where the entire desktop will randomly shut down fully (no BSOD), load into BIOS and say there are no boot options available. When I then hold down the power off button for a few seconds to turn it off, and then turn it back on, then it becomes available again.
I have a feeling it's a hardware issue with either the motherboard or PSU, but any advice for narrowing it down?
Have tried updating BIOS but did not seem to have any effect.
I also used to have common problems with the storage becoming corrupted, but that appears to have been fixed by updating from the Samsung 980 Pro to a new Samsung 990 Pro. Currently have both seated in the motherboard but the 980 has no partitions. The 980 is in the M.2_1 and the 990 is in M.2_2. Not sure if relevant any more...
Here are the pictures for before and after:
Here are the specs of the build:
https://pcpartpicker.com/list/tLsymD
I have a feeling it's a hardware issue with either the motherboard or PSU, but any advice for narrowing it down?
Have tried updating BIOS but did not seem to have any effect.
I also used to have common problems with the storage becoming corrupted, but that appears to have been fixed by updating from the Samsung 980 Pro to a new Samsung 990 Pro. Currently have both seated in the motherboard but the 980 has no partitions. The 980 is in the M.2_1 and the 990 is in M.2_2. Not sure if relevant any more...
Here are the pictures for before and after:
Here are the specs of the build:
https://pcpartpicker.com/list/tLsymD