Hello guy's,
I have some trouble with my new updated gear.. i'm fighting and searching for the solution for days. I have bought a new motherboard, RAM, CPU and cooler, assuming that it would be working after some research. Also did a fresh install for Win10. Now... I have alternating between 2 major problems;
1 -> Pc is working without issues with 1x 8gb RAM. When adding a second RAM, it does fire but gives no signal to my monitor (slot 1 and 3)(and no DRAM led showing). I have been alternating and checking each slot with a individually RAM and it boots perfectly, turned out that it isn't a RAM problem (I guess). However, when It does succeed to boot with 2 ram sticks...(slot 1 and 3) I am having blue screens of windows with the NTOSKRLN.EXE error. I have searched for the solution on this forum and youtube but no success. Also did a re-install of windows 10, no success.
2-> Whenever the pc did booted on 2 RAM sticks and I cut the power supply for about 30min, it is only going to boot for a second and then shuts-down.. repaids indefinite. Luckily I still had the battery of my old motherbord and that problem ''seemed'' to be away.
I did already contact MSI, they think it is not a hardware problem. The store were I bought this gear tellend me to RMA the RAM, but I am sure not convinced that the problem is coming from the RAM.
I did do and checked:
-> CMOS
-> Bios updated
-> Set the correct timings and voltage of RAM within bios, mobo refuses to boot and set it to default again.
-> CPU check (with loosing the screws) (attached pictures)
-> Cleaned the RAM
-> Switched battery
http://i67.tinypic.com/2qjysrr.jpg
http://nl.tinypic.com/r/mjttz8/9
http://nl.tinypic.com/r/flyp7a/9
My gear:
- I7-7000K @4.2ghz
- MSI Z270 Pro Carbon Gaming motherboard
- 2x 8gb Corsair 3000mhz C15 RAM
- X62 NZXT Krake
- Evga Geforce GTX1070 videocard
- MS-TECH 750W PSU
Hopefully someone can helpt me out here, very frustrating.
Kind Regards,
Danny
I have some trouble with my new updated gear.. i'm fighting and searching for the solution for days. I have bought a new motherboard, RAM, CPU and cooler, assuming that it would be working after some research. Also did a fresh install for Win10. Now... I have alternating between 2 major problems;
1 -> Pc is working without issues with 1x 8gb RAM. When adding a second RAM, it does fire but gives no signal to my monitor (slot 1 and 3)(and no DRAM led showing). I have been alternating and checking each slot with a individually RAM and it boots perfectly, turned out that it isn't a RAM problem (I guess). However, when It does succeed to boot with 2 ram sticks...(slot 1 and 3) I am having blue screens of windows with the NTOSKRLN.EXE error. I have searched for the solution on this forum and youtube but no success. Also did a re-install of windows 10, no success.
2-> Whenever the pc did booted on 2 RAM sticks and I cut the power supply for about 30min, it is only going to boot for a second and then shuts-down.. repaids indefinite. Luckily I still had the battery of my old motherbord and that problem ''seemed'' to be away.
I did already contact MSI, they think it is not a hardware problem. The store were I bought this gear tellend me to RMA the RAM, but I am sure not convinced that the problem is coming from the RAM.
I did do and checked:
-> CMOS
-> Bios updated
-> Set the correct timings and voltage of RAM within bios, mobo refuses to boot and set it to default again.
-> CPU check (with loosing the screws) (attached pictures)
-> Cleaned the RAM
-> Switched battery
http://i67.tinypic.com/2qjysrr.jpg
http://nl.tinypic.com/r/mjttz8/9
http://nl.tinypic.com/r/flyp7a/9
My gear:
- I7-7000K @4.2ghz
- MSI Z270 Pro Carbon Gaming motherboard
- 2x 8gb Corsair 3000mhz C15 RAM
- X62 NZXT Krake
- Evga Geforce GTX1070 videocard
- MS-TECH 750W PSU
Hopefully someone can helpt me out here, very frustrating.
Kind Regards,
Danny