Question DF800 Flux question

[Fowlplay]

Hi all, first post here. I’m doing my first build in about 15 years. I’m using a Antec DF 800 case. After getting it I realized it doesn’t have a reset button. Would there be any reason not to use the top mounted ARGB button in its place?

Edit: NVM, dumb question

 

[Lutfij]

Welcome to the forums, newcomer!

If you must reset the system, you might want to think about adding a button to the innards of your build with something like this;
https://www.amazon.com/uxcell-Replacement-Button-Switch-Computer/dp/B008LT2Q6I

or remove the button off the ARGB/Fan hub on the back as a reset button, provided the hub is tethered to a motherboard's ARGB header to manage the lights connected to the hub. If you don't have a motherboard with an ARGB header to mange the ARGB hub and you need a reset button, then you're best off getting a case that has a front panel reset button.

 

[Fowlplay]

Thanks for the welcome! I did some reading that confirms I can use the switch as a reset. I’m using a Tomahawk B550 so I’ll have ARGB through the MB.