Hi!
I had a WIFI cam connected to my network. Depending if it's use my wifi from my main router or via access point, for the same device, the MAC address changer. I can not set fix IP address into my WIFICam (not supported). I need a fix IP adress for my CCTV Software (motioneye).
Ex:
when connected with my router, the MAC address is : 02:0f:b5:22:a5:0f
when connected with my AP the MAC address is : 02:09:b5:22:a5:0f
I use Synology DiskStation for DHCP server, (running linux) and I can't figure out how to fix it.
I try to edit the "dhcpd-eth0-static.conf" my adding two line below:
dhcp-host=02:0f:b5:22:a5:0f,CamBack,192.168.1.22,86400
dhcp-host=02:09:b5:22:a5:0f,CamBack,192.168.1.22,86400
but DHCP won't work.
Can I use a second IP address and make an alias?
Can I modify the "dhcpd-eth0-static.conf" for IP forward?
Thank you in advance
Zythum
I had a WIFI cam connected to my network. Depending if it's use my wifi from my main router or via access point, for the same device, the MAC address changer. I can not set fix IP address into my WIFICam (not supported). I need a fix IP adress for my CCTV Software (motioneye).
Ex:
when connected with my router, the MAC address is : 02:0f:b5:22:a5:0f
when connected with my AP the MAC address is : 02:09:b5:22:a5:0f
I use Synology DiskStation for DHCP server, (running linux) and I can't figure out how to fix it.
I try to edit the "dhcpd-eth0-static.conf" my adding two line below:
dhcp-host=02:0f:b5:22:a5:0f,CamBack,192.168.1.22,86400
dhcp-host=02:09:b5:22:a5:0f,CamBack,192.168.1.22,86400
but DHCP won't work.
Can I use a second IP address and make an alias?
Can I modify the "dhcpd-eth0-static.conf" for IP forward?
Thank you in advance
Zythum