Digital File Cabinet/FileWise will not run

G

Guest

Guest
Archived from groups: alt.sys.pc-clone.dell (More info?)

Neither of these programs will run on my Dim. 4300 Home SP2, all updates, no
trojans-spyware etc. I tried uninstall, reinstall, and tried to run from
safe mode. No luck.

I just get a run-time error.

Every other scanning program works OK.

I got this advice in another group;
" run MDAC component checker and also check
for update for MS JET 4.0 database engine. "

MS JET 4.0 is current; I ran MDAC and got this result;
Registry Detail Mismatch:

HKEY_LOCAL_MACHINESOFTWARE\Classes\Interface\{0000054E-0000-0010-8000-00AA006D2EA4}
Value _Command25 Expected data=Command25;

I do not know if this any bearing on the problem of the two programs not
running.

A simpler solution might be a reasonably priced program that I could give a
try and see if it would work. Did a lot of googling and couldn't find
anything else.

Thanks for any help on the problem or advice on software.

Bob
 
G

Guest

Guest
Archived from groups: alt.sys.pc-clone.dell (More info?)

i never heard of filewise but typed in filewise.com and got a web site for
electronic filing cabinet software... try contacting them regarding your
problem. tell then what version you have so they may be able to suggest a
solution, patch or upgrade. as an alternative, have a look at
www.scansoft.com

"Leanin' Cedar" <Nospam@nospam.org> wrote in message
news:V98Rd.3627$9J5.1183@newsread2.news.atl.earthlink.net...
> Neither of these programs will run on my Dim. 4300 Home SP2, all updates,
> no trojans-spyware etc. I tried uninstall, reinstall, and tried to run
> from safe mode. No luck.
>
> I just get a run-time error.
>
> Every other scanning program works OK.
>
> I got this advice in another group;
> " run MDAC component checker and also check
> for update for MS JET 4.0 database engine. "
>
> MS JET 4.0 is current; I ran MDAC and got this result;
> Registry Detail Mismatch:
>
> HKEY_LOCAL_MACHINESOFTWARE\Classes\Interface\{0000054E-0000-0010-8000-00AA006D2EA4}
> Value _Command25 Expected data=Command25;
>
> I do not know if this any bearing on the problem of the two programs not
> running.
>
> A simpler solution might be a reasonably priced program that I could give
> a try and see if it would work. Did a lot of googling and couldn't find
> anything else.
>
> Thanks for any help on the problem or advice on software.
>
> Bob
>
 
G

Guest

Guest
Archived from groups: alt.sys.pc-clone.dell (More info?)

Thanks for the reply;

I forgot to mention that I have emailed both companies about tech support at
least 3 times the past month.
I may give scansoft paperport a try. Too bad there isn't a demo before
buying.

Bob

"Christopher Muto" <muto@worldnet.att.net> wrote in message
news:zJ8Rd.23844$ya6.606@trndny01...
>i never heard of filewise but typed in filewise.com and got a web site for
>electronic filing cabinet software... try contacting them regarding your
>problem. tell then what version you have so they may be able to suggest a
>solution, patch or upgrade. as an alternative, have a look at
>www.scansoft.com
>
> "Leanin' Cedar" <Nospam@nospam.org> wrote in message
> news:V98Rd.3627$9J5.1183@newsread2.news.atl.earthlink.net...
>> Neither of these programs will run on my Dim. 4300 Home SP2, all updates,
>> no trojans-spyware etc. I tried uninstall, reinstall, and tried to run
>> from safe mode. No luck.
>>
>> I just get a run-time error.
>>
>> Every other scanning program works OK.
>>
>> I got this advice in another group;
>> " run MDAC component checker and also check
>> for update for MS JET 4.0 database engine. "
>>
>> MS JET 4.0 is current; I ran MDAC and got this result;
>> Registry Detail Mismatch:
>>
>> HKEY_LOCAL_MACHINESOFTWARE\Classes\Interface\{0000054E-0000-0010-8000-00AA006D2EA4}
>> Value _Command25 Expected data=Command25;
>>
>> I do not know if this any bearing on the problem of the two programs not
>> running.
>>
>> A simpler solution might be a reasonably priced program that I could give
>> a try and see if it would work. Did a lot of googling and couldn't find
>> anything else.
>>
>> Thanks for any help on the problem or advice on software.
>>
>> Bob
>>
>
>
 
Thread starter Similar threads Forum Replies Date
G Prebuilt & Enterprise 11

ASK THE COMMUNITY