Digital Storm Launches HydroLux PRO Enthusiast Water Cooling

Status
Not open for further replies.

toddybody

Distinguished
Dec 13, 2010
1,201
1
19,960
240
Beautiful, I've decided to make my next build with a full custom loop...but dayum it looks daunting with rigid tubing. Great to see clean water cooling in such small form factors. If only they didnt cost as much as my car :(
 

Gam3r01

Titan
Moderator
The blue case looks like it has a radiator and pump from Swiftech. Looks like it's from the H220-X or H240-X.
It is indeed, the waterblock is also Swiftech's Apogee XL waterblock. It also looks like an EKWB on the GPU. At least you know they are using quality components.
 


The rigid tubing really is not daunting at all provided ya have the tooling.


http://www.overclock.net/t/1434002/wc-tools-thread

Calipers - 146 - Digital Fractional Caliper - $29.96
Http://www.generaltools.com/146--Digital-Fractional-Calipers_p_1228.html

Tube Reaming Tool - Rigid Tool 223S
https://www.ridgid.com/us/en/223s-227s-inner-outer-reamer
http://www.homedepot.com/p/HDX-Inner-Outer-Reamer-HDX085/204218601



Tape - Wrap acrylic before cutting at cut point
http://www.frozencpu.com/products/14493/too-40/2_x_180_Modding_Masking_Tape.html

Tube Mod Kit - 10mm / 12mm ID (EK-HD Tube D.I.Y. Kit 10&12mm)
http://www.frozencpu.com/products/21263/ex-tub-2005/EK_Solid_Tube_Modification_Kit_-_10mm_12mm_ID_EK-HD_Tube_DIY_Kit_10and12mm.html?tl=c633s2057b133

And something other than hand saw with fine tooth blades.....also place tape on cutting surface booth sides of blade

I used this as it was there


This works
http://www.amazon.com/Dremel-MS20-01-Moto-Saw-Variable-Compact/dp/B00AFELU6O
 
Status
Not open for further replies.

ASK THE COMMUNITY

TRENDING THREADS