Display going black after power on can't even see boot screen but can hear windows login and shutdown

Teja27

Commendable
Dec 31, 2016
5
0
1,510
It's a Samsung all in one PC. I did all the possible troubleshooting.
1. Checked screen in HDMI mode working continuously with out any black screen.
2. Two RAM slots checked by swapping the RAMS, only with single RAM, and all possible variations. Tried with new RAM as well but no change still screen goes black.
3. Disconnected all the motherboard connections and reconnected and powered on still same black screen.
4. It worked for 30 mins before upgrading graphics, bios and chipset drivers. After upgrading it went black. So I installed new operating system erasing all previous data. I formatted with NTFS slow format. And later installed fresh windows 7 operating system.
Weird thing is screen doesn't go black while installing operating system. After installation it will login to windows and goes black after few seconds. Again same thing "BLACK SCREEN" but can hear login and shutdown sounds.
5. I couldn't able to do something with bios settings as the screen goes black.

Could you please suggest any other trials that I can implement to reset bios and to uninstall graphic drivers and chipset drivers. Is it possible in safe mode? I don't think even it not gonna work but want to try it. Or IS THERE ANY OTHER BETTER SUGGESTION FROM YOU. Thanks to one who can come up with new suggestions other than those I already did.
 
sorry I didn't get you. What you mean by it could be monitor? Monitor is working fine. As I mentioned it's an ALL IN ONE SAMSUNG 3D. It works fine in HDMI mode when connected with HDMI cable and screen is in very good condition. It displays everything. And GPU? Could you please suggest is there any other option to deal with graphic drivers ?
 
what are you using to see what is on the monitor are you using vga cable hdmi or dvi. if hdmi then it should work great without any hiccup. also if it is vga or dvi then you would need a converter to convert the signal to whatever cable you are using
 
As I said it's ALL IN ONE SAMSUNG 3D it has HDMI mode and PC mode in it. In HDMI mode I used to connect my laptop to that all in one machine with a HDMI cable and I can see my laptop screen on that machine with out any fail. So what I need to bring to your notice is there is no problem with the screen of the ALL IN ONE MACHINE. Problem is when it switches to PC mode screen goes black can't able to see even BOOT options BUT can hear WINDOWS LOGIN and when I press power button I can hear WINDOWS SHUTDOWN.

So could you please suggest me how to get bios options displayed on PC Mode or any other alternatives. To restore or to uninstall bad drivers.
 
have you tried this method i will post more try link below

http://support-us.samsung.com/cyber/popup/iframe/pop_troubleshooting_fr.jsp?modelname=DP700A3D&homeid=439700&from_osc=&idx=473703&modelcode=DP700A3D-K01US&