Question display gpu

[zehk0ky]

i have following specs

asus prime a320m-f
ryzen 5 2600
8gb ddr4 2133mhz


When i install gtx 750 1gb it shows screen and works well, but when i install gtx 1060 6gb it once shows display and sometimes not..

Gtx 1060 is way bigger and cant fully enter the pcie x16 slot bcuz i use 2008 old pc case,is that the problem, when i used it on old motherboard p35-ds3l it worked well

 

[USAFRet]

Gtx 1060 is way bigger and cant fully enter the pcie x16 slot

It would seem that THIS is the problem.

 

[zehk0ky]

can u suggest me some pc case that can fit it well?

 

[USAFRet]

can u suggest me some pc case that can fit it well?

There are hundreds. Most of them would work.
Which ones have you looked at?

 

[zehk0ky]

DEEPCOOL case MATREXX 30 - DP-MATX-MATREXX30​

MS Gaming case ARMOR V310​

Those are cheaper that would fit the budget

 

[USAFRet]

Which specific GTX 1060 do you have?

 

[USAFRet]

And do NOT, repeat DO NOT, try to use that 1060 until it can be fully inserted into the slot.

 

[zehk0ky]

https://www.gigabyte.com/rs/Graphics-Card/GV-N1060WF2OC-6GD-rev-10-11#kf

 

[USAFRet]

https://www.gigabyte.com/rs/Graphics-Card/GV-N1060WF2OC-6GD-rev-10-11#kf

OK.
Either of those cases should work.

 

[zehk0ky]

I didnt notice it didnt enter fully, i was scared something went wrong, seems like new mobo doesnt accept half placed components

 

[USAFRet]

I didnt notice it didnt enter fully, i was scared something went wrong, seems like new mobo doesnt accept half placed components

NO component will work 100% if only partly inserted.

 

[zehk0ky]

did i damage it?

 

[USAFRet]

did i damage it?

It is possible.

Unknown until you get it mounted properly.