Question Disposing of old, unused hard drives whilst ensuring the data is not recoverable ?

sirhawkeye64

Distinguished
May 28, 2015
131
0
18,690
So I have probably 15-20 old hard drives that I no longer use (these are smaller drives from 10+ years ago, so like 500GB drives, and a few are some 250GB drives). I no longer use them but had used them to store personal data. I'm wanting to discard them or recycle them but want to make sure the data is not recoverable. From what I recall, exposing the disk platters destroys data that's on them I believe, or maybe I need to smash the platters themselves as well or at least damage them to a point where they cannot be rebuilt. Is this the best way to ensure that data is erased? The drives may work and I had thought about doing a full DoD erase on the drives that still work, but then figured this might be a waste of time if I"m just going to destroy them before recycling/discarding them.

Thoughts?
 
There is no need to physically destroy them. That would be a waste. Instead, it is sufficient to zero-fill them or to run an ATA Enhanced Secure Erase command against them. No government agency will be able to recover anything. Then you can confidently recycle the drives.
More the problem is finding a old machine with the proper cables. How long has it been since you have seen a machine that supports scsi. I was looking though my junk box in the garage and noticed I still had one of those drives.