DIY Bluetooth Speaker Build

[bennylava77]

I am building my own bluetooth speaker and I already have these speakers

https://www.amazon.com/gp/product/B001P86SP2/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1

I was planning on using this to run them

https://www.parts-express.com/dayton-audio-kab-250v3-2x50w-class-d-audio-amplifier-board-with-bluetooth-40--325-105

Does this seem good? Any reason not to use it? Can anyone suggest something better/cheaper?

Thank you for reading. I hope someone can offer some advice.

 

[endregyorffy2]

It seems good, but the speakers are 2x40w max.,and the amp is 2x50w, so if you turn the volume all the way up it might fry the speakers or cause some damage to them.

 

[madmatt30]

Good pairing ,you could go with the 30w amp but seeing as its only $5 cheaper Id stick with that you have.

Quite interested in this project,you should keep a post running on this mate.

 

[bennylava77]

It seems good, but the speakers are 2x40w max.,and the amp is 2x50w, so if you turn the volume all the way up it might fry the speakers or cause some damage to them.

I did have that concern, that company has a 2x30w board, do you think that would be sufficient to get the most out of those speakers?

 

[bennylava77]

Good pairing ,you could go with the 30w amp but seeing as its only $5 cheaper Id stick with that you have.

Quite interested in this project,you should keep a post running on this mate.

Thanks, I may update but I'm no woodworker so it might be really ugly. As long as it sounds good though.
Did you have the concern endregyorffy2 did about overloading the speakers? I picked the 2x50w because of the small price jump, but I don't want to blow the speakers. What do you think?