Archived from groups: alt.internet.wireless (
More info?)
Stuart Turrell wrote:
> I need more than the 1 computer connected to router 2, a laptop and pocket
> pc.
Ok so you need that #2 router
>
> Would it help if i moved the access point over in building 2 so a ethernet
> cable is fed to that from router 1, so the external aerial connects straight
> to the back of that?? then to router 2????
If you can 'see' the #1 router and the modem, the network looks like it
is working, but not quite configured correctly.
Are you setup as below -> maybe different numbers than mine?
>
>
>
> "OldGuy" <todh.invalid@yesterdayspc.com> wrote in message
> news:k8idnVytG_G65iHcRVn-qQ@speakeasy.net...
>
>>Ok, lets give this a try
>>
>>Stuart Turrell wrote:
>>
>>>Firstly, this is how my setup works:-
>>>
>>>ADSL MODEM
>>
>>ADSL MODEM is a bridge
>>
>>> to
>>>DLINK wireless router di-624 rev c
>>
>>#1 Router that *should* nat 192.168.0.something. I don't remember the
>>DLink defaults, but it could be something like 192.168.0.227 as its addy.
>>( The dlink uses the IP you get from your ISP for its IP with another for
>>the gateway at the ISP -> x.x.x.1 usually.
>>
>>> to
>>>External Aerial
>>> to
>>>External aerial
>>> to
>>>DLINK access point 2000ap+ in client mode
>>
>>Is this setup as a BRIDGE?
>>
>>> to
>>>DLINK wireless router di-624 rev b
>>
>>#2 Router should get an IP, netmask, gateway, and dns from the #1 router.
>>You can verify this in the menu setup.
>>
>>> to
>>>My computer finally.
>>
>>Your computer should get a different network from #2 router. If it
>>doesn't you won't get out. You may have to manually set the routers LOCAL
>>IP to something different than the local network of #1 Router ( use
>>192.168.100.something. Your computer's gateway addy should point to the
>>IP address of #2 Router with the proper netmask.
>>
>>Why do you have #2 router by the way? If you are only connecting ONE
>>computer, you don't need #2. If you have multiple computers attached to
>>#2, disregard that unless the bridge is capable of dealing with multiple
>>MAC on the local side. Then you would get the IP addy from #1 router.
>>
>>>The problem is my computer can see all the devices, log on into their
>>>html settings pages, including the ADSL modem, but i cannot gain access
>>>to the internet.
>>
>>Usually a DSL modem is a bridge. Are you sure that it isn't a
>>Bridge/Router combo? In this neck of the woods, verizone ships Routers
>>( most of the time ), and usually they work out of the box with no user
>>intervention.
>>
>>>The 2nd wireless router (rev B) has dhcp disabled, thus leaving my
>>>computer to log on with a static IP set in TCP/IP in windows xp.
>>
>>If you can only bride ONE MAC, you do need the router portion; use DHCP as
>>it works. In this case, you need to make sure that both routers are not
>>NAT'n the same networks. This setup *should* work as long as everybody is
>>pointing to the correct upsteam addys. I am not totally familiar with
>>these specific DLinks, so grant me some leeway. For instance, lets assume
>>that you ISP's gateway is 102.81.100.1/24 then:
>>
>>dsl modem bridges #1 router dhcp wan address from ISP
>>
>>#1 router wan ip -> 102.81.100.152 with 102.81.100.1 as the gw
>>#1 router lan ip -> 192.168.0.227/24
>>#1 router dhcp could be 192.168.0.1 to 192.168.0.11
>>#1 router gets dns from ISP and could be 102.81.100.2
>>
>>DLINK 2000AP bridges #2 dhcp wan address ( from #1 router.
>>
>>#2 router wan ip is 192.168.0.11 with 192.168.0.227 as the gw
>>#2 router lan ip is 192.168.100.227/24
>>#2 router dhcp could be 192.168.100.1 to 192.168.100.11
>>#2 router gets dns from #1 router -> 192.168.0.227
>>
>>Computer gets dhcp addy from #2 -> say 192.168.100.11 along with
>>192.168.100.227 as the gateway and 192.168.100.227 as dns.
>>
>>>How can i gain access to the net?? Please help me,
>>
>>You should be able to ping both sides of each router, along with the ISP
>>gateway ( and the rest of the Internet ) with this setup. Confused? Using
>>non-routable addys gives you lots of leeway as you don't have to break up
>>a class C into subnets. Routing is pretty easy as long as you follow some
>>simple rules.
>>1. each network must be unique
>>2. each network has a default gateway
>>3. you can't reuse a network later down the line.
>>
>>>Thankfully
>>>
>>>Stuart
>>
>>todh
>>
>>>
>
>