DNS replication

G

Guest

Guest
Archived from groups: microsoft.public.win2000.dns (More info?)

I need some help I am about to pull all my hair out!!!! I have 2 DNS
servers both are running Win2k3. On is in hrm.lan and the other is in
hh.hrm.lan. HRM.Lan is a AD-Integrated and replication is set to All domain
controllers in AD Domain. When I try and ping some clients in a hrm.lan
from hh.hrm.lan I get no replies. When I do a nslookup from a machine in
hh.hrm.lan and set the server to the hh.hrm.lan server I get the error where
it can't resolve. If I switch the server to the hrm.lan server I get my
resolution to work. What do I have set wrong? In my zone list on the dns
server in hh.hrm.lan should I see the zone hrm.lan? I have been told I
shouldn't because I am replicating to All domain controllers in AD domain.
If I try and delete that zone on the hh.hrm.lan dns server I get a access is
denied.

Hope this is enough info.
Thanks!

--
Scott Micale
330-877-3631
 
G

Guest

Guest
Archived from groups: microsoft.public.win2000.dns (More info?)

In news:uiCigAQaEHA.3944@tk2msftngp13.phx.gbl,
Scott Micale <hrm_admin@news.postalalias> asked for help and I offered my
suggestions below:
> I need some help I am about to pull all my hair out!!!! I have 2 DNS
> servers both are running Win2k3.

> One is in hrm.lan and the other is in
> hh.hrm.lan. HRM.Lan is a AD-Integrated and replication is set to All
> domain controllers in AD Domain.

> When I try and ping some clients in
> a hrm.lan from hh.hrm.lan I get no replies.

> When I do a nslookup
> from a machine in hh.hrm.lan and set the server to the hh.hrm.lan
> server I get the error where it can't resolve.

Curious, if you need to "set" it to a DNS server in hh.hrm.lan from a
machine that is sitting in hh.hrm.lan, then its telling me your DNS config
is incorrect.

> If I switch the
> server to the hrm.lan server I get my resolution to work.

Hmm, configuration issue, if you're saying you're doing this from a machine
in the child domain.

> What do I
> have set wrong? In my zone list on the dns server in hh.hrm.lan
> should I see the zone hrm.lan? I have been told I shouldn't because
> I am replicating to All domain controllers in AD domain. If I try and
> delete that zone on the hh.hrm.lan dns server I get a access is
> denied.

Depends on who you are logging in and from what machine which will dictate
whether you can do or not perform this function.

>
> Hope this is enough info.
> Thanks!

You need to either replicate to All domains in the forest or setup a
delegation.

Show us an ipconfig /all from a DC and a client in both the in the hrm.lan
and the hh.hrm.land domains please to get a clearer picture of what's going
on.

--
Regards,
Ace

Please direct all replies ONLY to the Microsoft public newsgroups
so all can benefit.

This posting is provided "AS-IS" with no warranties or guarantees
and confers no rights.

Ace Fekay, MCSE 2003 & 2000, MCSA 2003 & 2000, MCSE+I, MCT, MVP
Microsoft Windows MVP - Active Directory

HAM AND EGGS: A day's work for a chicken;
A lifetime commitment for a pig.
--
=================================
 
G

Guest

Guest
Archived from groups: microsoft.public.win2000.dns (More info?)

I don't have to "set" the server when doing a nslookup. I just tried to set
it to see if it made a difference. It did not, so I guess that answers that
question.

I am logging in as a Admin with full privileges. For the life of me
everytime I get the hrm.lan zone deleted on of the servers and stop and
restart the dns service, it reappears. What can I do to get the hrm.lan off
of the dns server in hh.hrm.lan? There must be something else I can try?

Thanks Ace!

"Ace Fekay [MVP]"
<PleaseSubstituteMyActualFirstName&LastNameHere@hotmail.com> wrote in
message news:%238MHzyUaEHA.3708@TK2MSFTNGP10.phx.gbl...
> In news:uiCigAQaEHA.3944@tk2msftngp13.phx.gbl,
> Scott Micale <hrm_admin@news.postalalias> asked for help and I offered my
> suggestions below:
> > I need some help I am about to pull all my hair out!!!! I have 2 DNS
> > servers both are running Win2k3.
>
> > One is in hrm.lan and the other is in
> > hh.hrm.lan. HRM.Lan is a AD-Integrated and replication is set to All
> > domain controllers in AD Domain.
>
> > When I try and ping some clients in
> > a hrm.lan from hh.hrm.lan I get no replies.
>
> > When I do a nslookup
> > from a machine in hh.hrm.lan and set the server to the hh.hrm.lan
> > server I get the error where it can't resolve.
>
> Curious, if you need to "set" it to a DNS server in hh.hrm.lan from a
> machine that is sitting in hh.hrm.lan, then its telling me your DNS config
> is incorrect.
>
> > If I switch the
> > server to the hrm.lan server I get my resolution to work.
>
> Hmm, configuration issue, if you're saying you're doing this from a
machine
> in the child domain.
>
> > What do I
> > have set wrong? In my zone list on the dns server in hh.hrm.lan
> > should I see the zone hrm.lan? I have been told I shouldn't because
> > I am replicating to All domain controllers in AD domain. If I try and
> > delete that zone on the hh.hrm.lan dns server I get a access is
> > denied.
>
> Depends on who you are logging in and from what machine which will dictate
> whether you can do or not perform this function.
>
> >
> > Hope this is enough info.
> > Thanks!
>
> You need to either replicate to All domains in the forest or setup a
> delegation.
>
> Show us an ipconfig /all from a DC and a client in both the in the
hrm.lan
> and the hh.hrm.land domains please to get a clearer picture of what's
going
> on.
>
> --
> Regards,
> Ace
>
> Please direct all replies ONLY to the Microsoft public newsgroups
> so all can benefit.
>
> This posting is provided "AS-IS" with no warranties or guarantees
> and confers no rights.
>
> Ace Fekay, MCSE 2003 & 2000, MCSA 2003 & 2000, MCSE+I, MCT, MVP
> Microsoft Windows MVP - Active Directory
>
> HAM AND EGGS: A day's work for a chicken;
> A lifetime commitment for a pig.
> --
> =================================
>
>
 
G

Guest

Guest
Archived from groups: microsoft.public.win2000.dns (More info?)

In news:%23RXEc7ZaEHA.2844@TK2MSFTNGP12.phx.gbl,
Scott Micale <hrm_admin@news.postalalias> asked for help and I offered my
suggestions below:
> I don't have to "set" the server when doing a nslookup. I just tried
> to set it to see if it made a difference. It did not, so I guess
> that answers that question.
>
> I am logging in as a Admin with full privileges. For the life of me
> everytime I get the hrm.lan zone deleted on of the servers and stop
> and restart the dns service, it reappears. What can I do to get the
> hrm.lan off of the dns server in hh.hrm.lan? There must be something
> else I can try?
>
> Thanks Ace!
>

No prob, but haven't figured it out yet!

You want to remove the zone for hrm.lan from the DNS server hosting
hh.hrm.lan? If they are separate zones, such as:

hrm.lan
hh.hrm.lan

Then you can delete the hrm.lan

If hh is a child of hrm.lan, then no, you can't delete the parent zone.
Re-create the child zone as hh.hrm.lan and then you can delete the other
tree.

Unless I;m still misunderstanding whats going on...?

--
Regards,
Ace

Please direct all replies ONLY to the Microsoft public newsgroups
so all can benefit.

This posting is provided "AS-IS" with no warranties or guarantees
and confers no rights.

Ace Fekay, MCSE 2003 & 2000, MCSA 2003 & 2000, MCSE+I, MCT, MVP
Microsoft Windows MVP - Active Directory

HAM AND EGGS: A day's work for a chicken;
A lifetime commitment for a pig.
--
=================================
 
G

Guest

Guest
Archived from groups: microsoft.public.win2000.dns (More info?)

Yes hh is a child of hrm.lan. So in hh.hrm.lan am I suppose to see the
hrm.lan zone? I thought I was not. I already have the hh.hrm.lan zone
setup in hh.hrm.lan so that does not need added. Are we on the same page?
Hopefully I haven't confused you too much.

Thanks again.

"Ace Fekay [MVP]"
<PleaseSubstituteMyActualFirstName&LastNameHere@hotmail.com> wrote in
message news:eaw7v8caEHA.1556@TK2MSFTNGP10.phx.gbl...
> In news:%23RXEc7ZaEHA.2844@TK2MSFTNGP12.phx.gbl,
> Scott Micale <hrm_admin@news.postalalias> asked for help and I offered my
> suggestions below:
> > I don't have to "set" the server when doing a nslookup. I just tried
> > to set it to see if it made a difference. It did not, so I guess
> > that answers that question.
> >
> > I am logging in as a Admin with full privileges. For the life of me
> > everytime I get the hrm.lan zone deleted on of the servers and stop
> > and restart the dns service, it reappears. What can I do to get the
> > hrm.lan off of the dns server in hh.hrm.lan? There must be something
> > else I can try?
> >
> > Thanks Ace!
> >
>
> No prob, but haven't figured it out yet!
>
> You want to remove the zone for hrm.lan from the DNS server hosting
> hh.hrm.lan? If they are separate zones, such as:
>
> hrm.lan
> hh.hrm.lan
>
> Then you can delete the hrm.lan
>
> If hh is a child of hrm.lan, then no, you can't delete the parent zone.
> Re-create the child zone as hh.hrm.lan and then you can delete the other
> tree.
>
> Unless I;m still misunderstanding whats going on...?
>
> --
> Regards,
> Ace
>
> Please direct all replies ONLY to the Microsoft public newsgroups
> so all can benefit.
>
> This posting is provided "AS-IS" with no warranties or guarantees
> and confers no rights.
>
> Ace Fekay, MCSE 2003 & 2000, MCSA 2003 & 2000, MCSE+I, MCT, MVP
> Microsoft Windows MVP - Active Directory
>
> HAM AND EGGS: A day's work for a chicken;
> A lifetime commitment for a pig.
> --
> =================================
>
>
 
G

Guest

Guest
Archived from groups: microsoft.public.win2000.dns (More info?)

In news:ea5XNgdaEHA.3524@TK2MSFTNGP12.phx.gbl,
Scott Micale <hrm_admin@news.postalalias> asked for help and I offered my
suggestions below:
> Yes hh is a child of hrm.lan. So in hh.hrm.lan am I suppose to see
> the hrm.lan zone? I thought I was not.

No, if the zone is physically created and spelled like this:
hh.hrm.lan

Then that's the zone name and you will not see hrm.lan unless you created it
separately and spelled it that way.

> I already have the
> hh.hrm.lan zone setup in hh.hrm.lan so that does not need added. Are
> we on the same page? Hopefully I haven't confused you too much.

I think so! :) If you also want to see hrm.lan on a DNS server that is a DC
in a different domain, then on the DNS server in the hrm.lan zone, you can
replicate the zone to all domains in teh forest, so then it should show up
in the application partition and when you physically create the zone and
make it AD Integrated, the zone will populate, taking it from the app
partition in the AD database.

>
> Thanks again.

I hope the helped and we're on the same page?


--
Regards,
Ace

Please direct all replies ONLY to the Microsoft public newsgroups
so all can benefit.

This posting is provided "AS-IS" with no warranties or guarantees
and confers no rights.

Ace Fekay, MCSE 2003 & 2000, MCSA 2003 & 2000, MCSE+I, MCT, MVP
Microsoft Windows MVP - Active Directory

HAM AND EGGS: A day's work for a chicken;
A lifetime commitment for a pig.
--
=================================
 
G

Guest

Guest
Archived from groups: microsoft.public.win2000.dns (More info?)

Well I think I understand what you are saying, but I almost feel like my DNS
is hosed on this child DC. I am considering removing the DNS and redoing
it. Will that mess up my AD if I uninstall DNS and then re-add it? Or
since this is my only dc in this domain I was thinking of getting a machine
and loading win2k3 on it and then making it a dc so I would have a backup if
something went wrong and then once I have gotten my regular DC back up,
dcpromo the one I just added and take it off the network. SHould I do that?
The replication is not being done right on the hh.hrm.lan domain and I think
starting over is my best bet.
"Ace Fekay [MVP]"
<PleaseSubstituteMyActualFirstName&LastNameHere@hotmail.com> wrote in
message news:ef7Rd3haEHA.1764@TK2MSFTNGP10.phx.gbl...
> In news:ea5XNgdaEHA.3524@TK2MSFTNGP12.phx.gbl,
> Scott Micale <hrm_admin@news.postalalias> asked for help and I offered my
> suggestions below:
> > Yes hh is a child of hrm.lan. So in hh.hrm.lan am I suppose to see
> > the hrm.lan zone? I thought I was not.
>
> No, if the zone is physically created and spelled like this:
> hh.hrm.lan
>
> Then that's the zone name and you will not see hrm.lan unless you created
it
> separately and spelled it that way.
>
> > I already have the
> > hh.hrm.lan zone setup in hh.hrm.lan so that does not need added. Are
> > we on the same page? Hopefully I haven't confused you too much.
>
> I think so! :) If you also want to see hrm.lan on a DNS server that is a
DC
> in a different domain, then on the DNS server in the hrm.lan zone, you can
> replicate the zone to all domains in teh forest, so then it should show up
> in the application partition and when you physically create the zone and
> make it AD Integrated, the zone will populate, taking it from the app
> partition in the AD database.
>
> >
> > Thanks again.
>
> I hope the helped and we're on the same page?
>
>
> --
> Regards,
> Ace
>
> Please direct all replies ONLY to the Microsoft public newsgroups
> so all can benefit.
>
> This posting is provided "AS-IS" with no warranties or guarantees
> and confers no rights.
>
> Ace Fekay, MCSE 2003 & 2000, MCSA 2003 & 2000, MCSE+I, MCT, MVP
> Microsoft Windows MVP - Active Directory
>
> HAM AND EGGS: A day's work for a chicken;
> A lifetime commitment for a pig.
> --
> =================================
>
>
 
G

Guest

Guest
Archived from groups: microsoft.public.win2000.dns (More info?)

In news:uEDyHvmaEHA.3752@TK2MSFTNGP12.phx.gbl,
Scott Micale <hrm_admin@news.postalalias> asked for help and I offered my
suggestions below:
> Well I think I understand what you are saying, but I almost feel like
> my DNS is hosed on this child DC. I am considering removing the DNS
> and redoing it. Will that mess up my AD if I uninstall DNS and then
> re-add it?

Usually its just a configuration issue. I wouldn't do that. Maybe if you do
have a DNS on the child, you can easily configure a delegation. Delegate
from the parent domain DNS to the child, then configure a forwarder from the
child back to the parent. The parent would forward to the ISP in this case,
and not the child.

255248 - HOW TO Create a Child Domain in Active Directory and Delegate the
DNS Namespace to the Child Domain:
http://support.microsoft.com/?id=255248

> Or since this is my only dc in this domain I was thinking
> of getting a machine and loading win2k3 on it and then making it a dc
> so I would have a backup if something went wrong and then once I have
> gotten my regular DC back up, dcpromo the one I just added and take
> it off the network. SHould I do that?

Its always recommended to have at least 2 DCs in each domain for a couple
reasons:
1. Fault tolerance and redundancy
2. The Infrastructure Master FSMO Role needs to be moved off the machine
that is a GC to the other machine in the domain. This really only is a
factor in a multi-domain environment, such as what you are planning.

> The replication is not being
> done right on the hh.hrm.lan domain and I think starting over is my
> best bet.

Not necessarily. Usually its just a configuration issue. If you were to
reinstall it and made the same configuration mistake, it will never go away!




Regards,
Ace

Please direct all replies ONLY to the Microsoft public newsgroups
so all can benefit.

This posting is provided "AS-IS" with no warranties or guarantees
and confers no rights.

Ace Fekay, MCSE 2003 & 2000, MCSA 2003 & 2000, MCSE+I, MCT, MVP
Microsoft Windows MVP - Active Directory

HAM AND EGGS: A day's work for a chicken;
A lifetime commitment for a pig.
--
=================================
 
G

Guest

Guest
Archived from groups: microsoft.public.win2000.dns (More info?)

I am already doing a delegation to my child and it isn't working. I had
this setup a few months back and it was fine. I am not sure what happened,
but now it is not working right.

When I do transfer the FSMO all I need to transfer is the PDC, RID, and
Infrastructure because my root server has the other 2 right? I did a netdom
and that is what it shows.


"Ace Fekay [MVP]"
<PleaseSubstituteMyActualFirstName&LastNameHere@hotmail.com> wrote in
message news:eDmuibqaEHA.1152@TK2MSFTNGP09.phx.gbl...
> In news:uEDyHvmaEHA.3752@TK2MSFTNGP12.phx.gbl,
> Scott Micale <hrm_admin@news.postalalias> asked for help and I offered my
> suggestions below:
> > Well I think I understand what you are saying, but I almost feel like
> > my DNS is hosed on this child DC. I am considering removing the DNS
> > and redoing it. Will that mess up my AD if I uninstall DNS and then
> > re-add it?
>
> Usually its just a configuration issue. I wouldn't do that. Maybe if you
do
> have a DNS on the child, you can easily configure a delegation. Delegate
> from the parent domain DNS to the child, then configure a forwarder from
the
> child back to the parent. The parent would forward to the ISP in this
case,
> and not the child.
>
> 255248 - HOW TO Create a Child Domain in Active Directory and Delegate the
> DNS Namespace to the Child Domain:
> http://support.microsoft.com/?id=255248
>
> > Or since this is my only dc in this domain I was thinking
> > of getting a machine and loading win2k3 on it and then making it a dc
> > so I would have a backup if something went wrong and then once I have
> > gotten my regular DC back up, dcpromo the one I just added and take
> > it off the network. SHould I do that?
>
> Its always recommended to have at least 2 DCs in each domain for a couple
> reasons:
> 1. Fault tolerance and redundancy
> 2. The Infrastructure Master FSMO Role needs to be moved off the machine
> that is a GC to the other machine in the domain. This really only is a
> factor in a multi-domain environment, such as what you are planning.
>
> > The replication is not being
> > done right on the hh.hrm.lan domain and I think starting over is my
> > best bet.
>
> Not necessarily. Usually its just a configuration issue. If you were to
> reinstall it and made the same configuration mistake, it will never go
away!
>
>
>
>
> Regards,
> Ace
>
> Please direct all replies ONLY to the Microsoft public newsgroups
> so all can benefit.
>
> This posting is provided "AS-IS" with no warranties or guarantees
> and confers no rights.
>
> Ace Fekay, MCSE 2003 & 2000, MCSA 2003 & 2000, MCSE+I, MCT, MVP
> Microsoft Windows MVP - Active Directory
>
> HAM AND EGGS: A day's work for a chicken;
> A lifetime commitment for a pig.
> --
> =================================
>
>
 
G

Guest

Guest
Archived from groups: microsoft.public.win2000.dns (More info?)

In news:OViQ8yqaEHA.1652@TK2MSFTNGP09.phx.gbl,
Scott Micale <hrm_admin@news.postalalias> posted a question
Then Kevin replied below:
> When I do transfer the FSMO all I need to transfer is the
> PDC, RID, and Infrastructure because my root server has
> the other 2 right? I did a netdom and that is what it
> shows.

The parent domain has its own PDC, RID and Infrastructure master as will the
child domain. There is one each of these masters per domain. Your child
domain cannot hold the PDC, RID or Infrastructure Master for the parent
domain.
In addition there is also a Domain Naming Master and Schema Master, these
two masters are one each per Forest.



--
Best regards,
Kevin D4 Dad Goodknecht Sr. [MVP]
Hope This Helps
============================
--
When responding to posts, please "Reply to Group" via your
newsreader so that others may learn and benefit from your
issue. To respond directly to me remove the nospam. from my
email. ==========================================
http://www.lonestaramerica.com/
==========================================
Use Outlook Express?... Get OE_Quotefix:
It will strip signature out and more
http://home.in.tum.de/~jain/software/oe-quotefix/
==========================================
Keep a back up of your OE settings and folders with
OEBackup:
http://www.oehelp.com/OEBackup/Default.aspx
==========================================
 
G

Guest

Guest
Archived from groups: microsoft.public.win2000.dns (More info?)

In news:OViQ8yqaEHA.1652@TK2MSFTNGP09.phx.gbl,
Scott Micale <hrm_admin@news.postalalias> asked for help and I offered my
suggestions below:
> I am already doing a delegation to my child and it isn't working. I
> had this setup a few months back and it was fine. I am not sure what
> happened, but now it is not working right.
>
> When I do transfer the FSMO all I need to transfer is the PDC, RID,
> and Infrastructure because my root server has the other 2 right? I
> did a netdom and that is what it shows.
>
>

Well, at this point I do not know what is going on by your description.
Probably something that I would need to remote in to and have the ability to
look at both DNS servers' configuration, preferably from the parent DNS
since Enterprise Admin can make changes in any domain.

Demoting using dcpromo usually automatically takes care of this. If you did
it manually, that's cool too. Don't forget the GC has to be moved manually.


Regards,
Ace

Please direct all replies ONLY to the Microsoft public newsgroups
so all can benefit.

This posting is provided "AS-IS" with no warranties or guarantees
and confers no rights.

Ace Fekay, MCSE 2003 & 2000, MCSA 2003 & 2000, MCSE+I, MCT, MVP
Microsoft Windows MVP - Active Directory

HAM AND EGGS: A day's work for a chicken;
A lifetime commitment for a pig.
--
=================================
 
G

Guest

Guest
Archived from groups: microsoft.public.win2000.dns (More info?)

Right the parent does the Domain Naming Master and Schema Master and my
child original DC would do the other three. Those 3 would be the ones I
need to transfer to the new child dc.

"Kevin D. Goodknecht Sr. [MVP]" <admin@nospam.WFTX.US> wrote in message
news:elkTx$qaEHA.3820@tk2msftngp13.phx.gbl...
> In news:OViQ8yqaEHA.1652@TK2MSFTNGP09.phx.gbl,
> Scott Micale <hrm_admin@news.postalalias> posted a question
> Then Kevin replied below:
> > When I do transfer the FSMO all I need to transfer is the
> > PDC, RID, and Infrastructure because my root server has
> > the other 2 right? I did a netdom and that is what it
> > shows.
>
> The parent domain has its own PDC, RID and Infrastructure master as will
the
> child domain. There is one each of these masters per domain. Your child
> domain cannot hold the PDC, RID or Infrastructure Master for the parent
> domain.
> In addition there is also a Domain Naming Master and Schema Master, these
> two masters are one each per Forest.
>
>
>
> --
> Best regards,
> Kevin D4 Dad Goodknecht Sr. [MVP]
> Hope This Helps
> ============================
> --
> When responding to posts, please "Reply to Group" via your
> newsreader so that others may learn and benefit from your
> issue. To respond directly to me remove the nospam. from my
> email. ==========================================
> http://www.lonestaramerica.com/
> ==========================================
> Use Outlook Express?... Get OE_Quotefix:
> It will strip signature out and more
> http://home.in.tum.de/~jain/software/oe-quotefix/
> ==========================================
> Keep a back up of your OE settings and folders with
> OEBackup:
> http://www.oehelp.com/OEBackup/Default.aspx
> ==========================================
>
>
 
G

Guest

Guest
Archived from groups: microsoft.public.win2000.dns (More info?)

Do you want to remote in? I can get you access if you want.

"Ace Fekay [MVP]"
<PleaseSubstituteMyActualFirstName&LastNameHere@hotmail.com> wrote in
message news:Ol8BMDraEHA.3524@TK2MSFTNGP12.phx.gbl...
> In news:OViQ8yqaEHA.1652@TK2MSFTNGP09.phx.gbl,
> Scott Micale <hrm_admin@news.postalalias> asked for help and I offered my
> suggestions below:
> > I am already doing a delegation to my child and it isn't working. I
> > had this setup a few months back and it was fine. I am not sure what
> > happened, but now it is not working right.
> >
> > When I do transfer the FSMO all I need to transfer is the PDC, RID,
> > and Infrastructure because my root server has the other 2 right? I
> > did a netdom and that is what it shows.
> >
> >
>
> Well, at this point I do not know what is going on by your description.
> Probably something that I would need to remote in to and have the ability
to
> look at both DNS servers' configuration, preferably from the parent DNS
> since Enterprise Admin can make changes in any domain.
>
> Demoting using dcpromo usually automatically takes care of this. If you
did
> it manually, that's cool too. Don't forget the GC has to be moved
manually.
>
>
> Regards,
> Ace
>
> Please direct all replies ONLY to the Microsoft public newsgroups
> so all can benefit.
>
> This posting is provided "AS-IS" with no warranties or guarantees
> and confers no rights.
>
> Ace Fekay, MCSE 2003 & 2000, MCSA 2003 & 2000, MCSE+I, MCT, MVP
> Microsoft Windows MVP - Active Directory
>
> HAM AND EGGS: A day's work for a chicken;
> A lifetime commitment for a pig.
> --
> =================================
>
>
 
G

Guest

Guest
Archived from groups: microsoft.public.win2000.dns (More info?)

In news:eiQEXLraEHA.2016@TK2MSFTNGP09.phx.gbl,
Scott Micale <hrm_admin@news.postalalias> asked for help and I offered my
suggestions below:
> Do you want to remote in? I can get you access if you want.
>

A little later tonite, if ok. What time zone are you in? Email me privately.
Replace my actual firstandlastname@hotmail.com in my email address.

--
Regards,
Ace

Please direct all replies ONLY to the Microsoft public newsgroups
so all can benefit.

This posting is provided "AS-IS" with no warranties or guarantees
and confers no rights.

Ace Fekay, MCSE 2003 & 2000, MCSA 2003 & 2000, MCSE+I, MCT, MVP
Microsoft Windows MVP - Active Directory

HAM AND EGGS: A day's work for a chicken;
A lifetime commitment for a pig.
--
=================================
 
G

Guest

Guest
Archived from groups: microsoft.public.win2000.dns (More info?)

I am in the eastern time zone. I will email you all the details to get in
and give you more info on our network. Thanks a lot. I just don't know
where else to go with this.
"Ace Fekay [MVP]"
<PleaseSubstituteMyActualFirstName&LastNameHere@hotmail.com> wrote in
message news:eb2e5YraEHA.4092@TK2MSFTNGP11.phx.gbl...
> In news:eiQEXLraEHA.2016@TK2MSFTNGP09.phx.gbl,
> Scott Micale <hrm_admin@news.postalalias> asked for help and I offered my
> suggestions below:
> > Do you want to remote in? I can get you access if you want.
> >
>
> A little later tonite, if ok. What time zone are you in? Email me
privately.
> Replace my actual firstandlastname@hotmail.com in my email address.
>
> --
> Regards,
> Ace
>
> Please direct all replies ONLY to the Microsoft public newsgroups
> so all can benefit.
>
> This posting is provided "AS-IS" with no warranties or guarantees
> and confers no rights.
>
> Ace Fekay, MCSE 2003 & 2000, MCSA 2003 & 2000, MCSE+I, MCT, MVP
> Microsoft Windows MVP - Active Directory
>
> HAM AND EGGS: A day's work for a chicken;
> A lifetime commitment for a pig.
> --
> =================================
>
>
 
G

Guest

Guest
Archived from groups: microsoft.public.win2000.dns (More info?)

In news:OqFCNcraEHA.996@TK2MSFTNGP12.phx.gbl,
Scott Micale <hrm_admin@news.postalalias> asked for help and I offered my
suggestions below:
> I am in the eastern time zone. I will email you all the details to
> get in and give you more info on our network. Thanks a lot. I just
> don't know where else to go with this.

Ok, I'm in the Philly suburbs so Im in the EST zone as well. Look forward to
your email.

--
Regards,
Ace

Please direct all replies ONLY to the Microsoft public newsgroups
so all can benefit.

This posting is provided "AS-IS" with no warranties or guarantees
and confers no rights.

Ace Fekay, MCSE 2003 & 2000, MCSA 2003 & 2000, MCSE+I, MCT, MVP
Microsoft Windows MVP - Active Directory

HAM AND EGGS: A day's work for a chicken;
A lifetime commitment for a pig.
--
=================================
 

TRENDING THREADS