do i have a P4B or P4C??

[dd_viper]

ok i thought i had a p4b,running at 533, but while running sis sandra today, i saw somthing interesting.

it says in SiSoftware Sandra

Processor
Model : Intel(R) Pentium(R) 4 CPU 2.80GHz
Speed : 2.79GHz
Performance Rating : PR3072 (estimated)
Type : Standard
Package : FC µPGA478
Rated Speed/FSB : 2800MHz / 4x 133MHz
Multiplier : 21/1x
Minimum/Maximum Multiplier : 0/1x / 21/1x
Generation : G8
Name : P4N (Northwood) Pentium 4C 130nm 1.6-3.4GHz 1.475-1.575V
Revision/Stepping : 2 / 9 (9)
Stepping Mask : D1
Microcode : MU0F292E
Core Voltage Rating : 1.550V
Maximum Physical / Virtual Addressing : 36-bit / 32-bit
Native Page Size : 4kB

Co-Processor (FPU)
Type : Built-in
Revision/Stepping : 2 / 9 (9)

Processor Cache(s)
Internal Data Cache : 8kB Synchronous Write-Thru (4-way, 64 byte line size)
Internal Trace Cache : 12kB Synchronous Write-Thru (8-way, 64 byte line size)
L2 On-board Cache : 512kB ECC Synchronous ATC (8-way sectored, 64 byte line size)
L2 Cache Multiplier : 1/1x (2793MHz)

Upgradeability
Socket/Slot : WMT478/NWD
Upgrade Interface : Socket 478
Supported Speed(s) : 3.40GHz+

Processor Power Management
Processor Throttling Enabled : Yes
Throttle Range : 12% - 100%

Features
FPU - Co-Processor Built-in : Yes
VME - Virtual Mode Extensions : Yes
DE - Debugging Extension : Yes
PSE - Page Size Extension : Yes
TSC - Time Stamp Counter : Yes
MSR - Model Specific Registers : Yes
PAE - Physical Address Extension : Yes
MCE - Machine Check Exception : Yes
CX8 - Compare & Exchange Instruction : Yes
APIC - Local APIC Built-in : Yes
SEP - Fast System Call : Yes
MTRR - Memory Type Range Registers : Yes
PGE - Page Global Enable : Yes
MCA - Machine Check Architecture : Yes
PAT - Page Attribute Table : Yes
PSE36 - 36-bit Page Size Extension : Yes
PSN - Unique Serial Number : No
CLF - Cache Line Flush Support : Yes
DS - Debug Trace & EMON Store : Yes
ACPI - Software Clock Control : Yes
(W)MMX Technology : Yes
FXSR - Fast Float Save & Restore : Yes
SSE Technology : Yes
SSE2 Technology : Yes
SS - Self Snoop : Yes
HTT - Hyper-Threading Technology : No
TM - Thermal Monitor : Yes
PBE - Pending Break Enable : Yes
IA64 Technology : No
SSE3 Technology : No
MON - Monitor/MWait : No
DSCPL - CPL qualified Debug Store : No
EST - Enhanced SpeedStep Technology : No
TM2 - Thermal Monitor 2 : No
CID - Context ID : Yes
xTPR - Send Task Priority Messages : Yes
DAZ - Denormals Are Zero : Yes

Advanced Settings
Data Error Checking : No
Fast Strings : Yes
x86 FPU Compatibility Mode : No
Prefetch Queue : Yes
Branch Trace Storage : Yes
Data Cache Active Mode : Yes
IO Queue Depth : 12 request(s)
TM - Thermal Monitor : Yes

Machine Check Architecture Settings
Number of Reporting Banks : 4 bank(s)
Extended Machine Check Support : Yes
Number of Extended Reporting Banks : 12 bank(s)

so do i have a C or B? i do have the ibm stock p4 that could have been underclocked so it could b possible that i have a C.

"Freeze, your under arrest for the murder of Moe Sislack and Apu Nahasapasa...OK nevermind, just moe, just moe."

 

[endyen]

Sysoft is easily confused. Where it says rated fsb is probably correct. A P4c would say 4X 200, while yours says 4X 133, or 533. It is probably a P4b. Just to confirm, check the multiplier, in bios. If it's 21, it's a "b", if it's 14, it's a "c"

 

[dd_viper]

ok i checked the bios and it is a b while it does also say 4x133. Thanks endyen

"Freeze, your under arrest for the murder of Moe Sislack and Apu Nahasapasa...OK nevermind, just moe, just moe."

 

[Crashman]

It says right in there you have the 133MHz (533) bus, which means P4B.

<font color=blue>Only a place as big as the internet could be home to a hero as big as Crashman!</font color=blue>
<font color=red>Only a place as big as the internet could be home to an ego as large as Crashman's!</font color=red>

 

[dd_viper]

o lol didnt c that. heh thanks

"Freeze, your under arrest for the murder of Moe Sislack and Apu Nahasapasa...OK nevermind, just moe, just moe."