Do Nh-d15 Fit in my case?

[olanof]

hi guys i need to buy a new Cpu Cooler and i would like to buy nh d15

i've CM Storm Enforcer and my MoBo is Asus p8p67 EVO and my Ram are G.Skill Ripjaws 4x4 1600mhz

https://photo.yeppon.it/g-skill-ddr3-4gb/78-7800332-2045_411_x_162.jpg

i can fit the Noctua? ram its a bit high i dont know if will find problem.

 

[Barty1884]

175mm height clearance as per
http://www.coolermaster.com/case/mid-tower/enforcer/

The NH-D15 is 165mm


The front fan can be raised a little to accommodate the heatspreaders of the G.Skill RAM..... you've got 10mm clearance for that.

IIRC, the NH-D15 fits fine overtop of Patriot Viper 3 modules, which are 36mm in height (ie without moving the fan up)
The RipjawsX kit is 40mm, so even raising the fan the minimum needed (+4mm), you should still be left with 5-6mm.


tl;dr: It'll be snug with your case side panel (ie a <6mm)..... but should fit.

 

[Dark Lord of Tech]

Max CPU Cooler Height for that case is 175mm.
http://www.coolermaster.com/case/mid-tower/enforcer/

D-15 is
Height (with fan)
165 mm

Modules can be a Max of 32mm

Ripjaws X is 40mm , won't fit.

 

[Dark Lord of Tech]

I used LP modules with that cooler and case and no issues , but it was super tight.

 

[Barty1884]

Max CPU Cooler Height for that case is 175mm.
http://www.coolermaster.com/case/mid-tower/enforcer/

D-15 is
Height (with fan)
165 mm

Modules can be a Max of 32mm

Ripjaws X is 40mm , won't fit.

If the cooler height is 165mm, that factors in modules of 32mm does it not? So there's +8mm required for the RipjawsX, and 10mm still available?

I used LP modules with that cooler and case and no issues , but it was super tight.

Definitely great to hear first-hand knowledge though. On paper, it should fit. Very snug, but should fit.

 

[Dark Lord of Tech]

It fits and so does the Phanteks PH-TC14PE , but they are both real tight fits.Misses the side panel window , but barely.

 

[olanof]

If i cant fit noctua nhd15, anoter great cpu cooler like this? Or maybe a AIO with si single fan to put to back panel

edit:

following this video, he mount nh d15 with dominator platinum that are 55mm height ram

so i can fit but i cant close the case, my case its always open so thats not a problem

https://www.youtube.com/watch?v=Qq9hqeDgdWk