[SOLVED] Does it fit??

[Trumpet227]

Does a large cooler like a NH-D15 fit inside my MSI MPG gungir 111r case?? Thanks

 

[Deleted member 362816]

Max cpu cooler lenght - 170 mm / 6.69 inches

https://www.msi.com/PC-Case/MPG-GUNGNIR-111R/Specification

 

[Phaaze88]

Gungnir 111R: up to 170mm
NH-D15: 165mm, but there's only about 31mm of ram clearance. The front fan can be raised some, but it increases the total height of the cooler.

It'll fit, but depending on how tall your ram is, you may not be able to do the default push-push shown in pictures, but will have to resort to pull-pull instead.
Push-push: <[]fan <[]fan
Pull-pull: <fan[] <fan[]

You only have 4-5mm of clearance to work with if the ram is taller than 31mm.

 

[Trumpet227]

Gungnir 111R: up to 170mm
NH-D15: 165mm, but there's only about 31mm of ram clearance. The front fan can be raised some, but it increases the total height of the cooler.

It'll fit, but depending on how tall your ram is, you may not be able to do the default push-push shown in pictures, but will have to resort to pull-pull instead.
Push-push: <[]fan <[]fan
Pull-pull: <fan[] <fan[]

You only have 4-5mm of clearance to work with if the ram is taller than 31mm.

Just checked and ram height is 3.4CM (34MM). Do other forums say It'll work with NH-D15?

 

[Phaaze88]

Just checked and ram height is 3.4CM (34MM). Do other forums say It'll work with NH-D15?

So that means you can raise the front fan 3-4mm, to a total height of 168-169mm.

I don't understand the 2nd part.

 

[Trumpet227]

So that means you can raise the front fan 3-4mm, to a total height of 168-169mm.

I don't understand the 2nd part.

Sorry it was " I saw other forums say that it was capable to work with the cooler.

 

[Phaaze88]

Sorry it was " I saw other forums say that it was capable to work with the cooler.

Oh, gotcha. They left out that the ram also plays a part though - but it's fine in your scenario.

 

[Trumpet227]

Oh, gotcha. They left out that the ram also plays a part though - but it's fine in your scenario.

Oh ok, thanks.