Hello, i recently built a new pc, and because it did not boot up i rebuilt it and will share a picture with you all, the computer still does not boot, i did the 2 pin test on the psw with a screwdriver, after i plug in the 24 pin from the psu the motherboard flashes a red light but it does not boot.
What could be wrong? You can see al the cables from the picture, and i put the psw according to the manual, the board is the msi b450m pro.
http://imgur.com/a/5m3Fbqg
I am going to buy another PSU due to the current one being american and i had to use some cheap adaptor, the new PSU will be Corsair CX650M
What could be wrong? You can see al the cables from the picture, and i put the psw according to the manual, the board is the msi b450m pro.
http://imgur.com/a/5m3Fbqg
System:
Msi b450m gaming plus.
Corsair vengeance lpx DDR4.
Ryzan 2600.
Corsair vs 550W 80 plus.
RX 580 4 GB.
Cooler Master Hyper 212 EVO CPU Air Cooler
I am going to buy another PSU due to the current one being american and i had to use some cheap adaptor, the new PSU will be Corsair CX650M