[SOLVED] Does this system have enough cooling?

[nmvx]

I'm building a PC with these components:
Ryzen 5 1600, BOX
Palit Geforce gt 1030 2GB GDDR5
Asrock B450 Pro4
Be Quiet SYSTEM POWER 9 400W
RAM Samsung [M378A1G43TB1-CTD] 8 Gb, 2666Mh
SSD Kingston UV400 120Gb
So I have an old case with PSU mountable on top. It has only one slot for case fan, where I'm planning to put this exhaust fan Xilence XF043 with the following parameters: 80mmx80mm, 1800 rotations per minute. I removed 2 front pannels of the case for improved airflow, as shown in the picture below

I'm not planning to overclock this system. But imagine the system runs at full power(not overclocked).

Question: Will this system have enough air ventilations to keep the motherboard and VRMs from getting too hot?

 

[SgtScream]

Can you upload a pictures of the case onto this thread please? You don't have high end hardware so wouldn't imagine thermals to be that big of a deal so long as you have a front intake fan and rear exhaust.

 

[nmvx]

Can you upload a pictures of the case onto this thread please?

The case is almost like the one in these pictures
http://www.highonsolder.com/wp-content/uploads/2009/03/PC_inside1.jpg
http://www.highonsolder.com/wp-content/uploads/2009/03/PC_front-back.jpg

It doesn't have any windows on the front panel to where one can mount intake fans.

 

[SgtScream]

You'll be fine with your mid end component selection in that case. Especially with a front intake an rear exhaust.