Okay please don’t roast me but this is what happen. I got some new ram to put in my brother computer so I installed the new ram and since I recently got liquid metal conductonaut I wanted to use it. So I put some and of course I put a little too much I put some back and use what was left. So I spread it out on the cpu and heat sink. I put on the aio cooler and when I turned on the computer at first it turns on and seemed to work but didn’t get a signal to monitor. I thought I had to clear the cmos so I took it apart again and I wanted to check if the liquid metal moved and put the cooler back then I put the pc back together and nothing happens when I push the power button. nothing turns on. So I checked it again and saw that some liquid metal was on the cpu tension bracket I don’t know if that caused anything. please help I don’t know what part is broken.