Question DRAM and CPU debug LEDs, PC won't boot

[M Mack]

Mobo: ASRock z590 pro4
CPU: i9 11900k
RAM: Timetec Pinnacle Konduit DDR4 3200MHz

I can't get the PSC CPU debug led to go off/ Can't get it to boot to bios at all.
The CPU is brand new, no bent pins or debris

• The ram lights up- tried all slots, and no ram
• Cleared the CMOS

-Tested other power supply

I honestly don't know what to do next? Faulty motherboard?
Any advice would be greatly appreciated

 

[Fix_that_Glitch]

Did you check your power 8 pin power supply to the cpu?

 

[pierreandré]

If you tried removing and putting it all over again it's possible that the motherboard is faulty. I also read the same problem you had 2 years ago from reddit he said that when he replaced the motherboard everything worked fine.

 

[M Mack]

Did you check your power 8 pin power supply to the cpu?

Yeah, i checked it, and used a seperate cord and power supply to double check!

 

[M Mack]

If you tried removing and putting it all over again it's possible that the motherboard is faulty. I also read the same problem you had 2 years ago from reddit he said that when he replaced the motherboard everything worked fine.

That makes sense. I was just hoping not to have to replace the MB
Thanks for the input!