DRAM Frequency - How to change it? Foxconn motherboard!

[dommi10]

Hello guys, I have foxconn motherboard and I cant get my ram to work on 533MHz or any else bigger than 266MHz.
Ive checked BIOS and there's no settings for RAM, i think that isnt in my bios.
So my motherboard is😛ackard Bell iMedia J9640 or Motherboard ID 07/30/2007-PT890-8237A-6A7L8FKEC-00
And ram is Kingston 800MHz DDR2. 2gb and 1gb.
What is the problem? How to change ram freq that dont need bios? Because its locked or something.
If you need anything just tell and il take pictures or any informations you need..

 

[Tradesman1]

Prebuilt Packard Bells have a locked BIOS so you can't make changes, can check for a BIOS update which may help, but doubtful. Sorry

 

[dommi10]

Prebuilt Packard Bells have a locked BIOS so you can't make changes, can check for a BIOS update which may help, but doubtful. Sorry

I knew it -_- god damn packard!
The worst problem is now that this motherboard is same like 100 of them.. I was on packard bell site to check for bios update, to see is there any newer bios with unlocked bios and this motherboard have 6 of them, same versions, same look, but another name, so how to be sure that Ive chose right BIOS and if I dont chose right BIOS what would happend? Thanks for help.

 

[dommi10]

And yeah, DRAM FREQ is 266, if I buy 2x2gb with 533MHz would then DRAM FREQ be 533? Or it will be same? I kinda hate these SINGLE CHANNEL motherboards, dual channel is better i think..

 

[dommi10]

bump anyone please? about bios question? Thx

 

[Tradesman1]

You could brick the mobo with the wrong BIOS, might email them