Hi guys.
A couple of days ago I built a new PC
Specs.
CPU i5 11400f
RAM G Skill 16 GB 3600mhz
GPU RTX 3060 TI
MOBO B560M Aorus Pro
Ever since then the PC gave problems booting. The DRAM LED red light was on. I tried installing with just one stick, both sticks in the different slots, and it seems none are working. The odd thing is that sometimes the PC starts after I reset the CMOS. But after resetting it, the computer will start, but once I restart the pc or shut it down, the system goed back to an endless loop. The only way I can fix the endless loop is by resseting the CMOS.
I have tried looking everywhere online. People say that it is a bent cpu pin, some say there are cables not plugged in properly. I thoroughly made sure all the cables were plugged in. I did not check for a cpu pin that is bent since I do not know what to do with the thermal paste and if I can just place the Cooler on top again or if I have to apply brand new thermal paste.
Please help.
A couple of days ago I built a new PC
Specs.
CPU i5 11400f
RAM G Skill 16 GB 3600mhz
GPU RTX 3060 TI
MOBO B560M Aorus Pro
Ever since then the PC gave problems booting. The DRAM LED red light was on. I tried installing with just one stick, both sticks in the different slots, and it seems none are working. The odd thing is that sometimes the PC starts after I reset the CMOS. But after resetting it, the computer will start, but once I restart the pc or shut it down, the system goed back to an endless loop. The only way I can fix the endless loop is by resseting the CMOS.
I have tried looking everywhere online. People say that it is a bent cpu pin, some say there are cables not plugged in properly. I thoroughly made sure all the cables were plugged in. I did not check for a cpu pin that is bent since I do not know what to do with the thermal paste and if I can just place the Cooler on top again or if I have to apply brand new thermal paste.
Please help.