Question DRAM voltage

[metju]

Hi, I bought a new RAM memory, but in the bios I have DRAM voltage red text. RAMs should have 1.35V.
Otherwise the RAMs are 3200MHz but run at 2400 MHz

My question is, can I enter 1.35V?


Thank you

 

[rgd1101]

look like it is not running xmp

 

[metju]

look like it is not running xmp

um, what should I do to get my ramps running at full speed?

 

[rgd1101]

turn the xmp profile on

 

[metju]

turn the xmp profile on

I have this to choose from

idont know what should I do, sorry

 

[SkyNetRising]

I have this to choose from
idont know what should I do, sorry

Load XMP.
Save BIOS settings.
Reboot.

 

[metju]

Load XMP.
Save BIOS settings.
Reboot.

but what should I choose from those 2 options?

 

[SkyNetRising]

but what should I choose from those 2 options?

Choose one or the other.

Choose 3200mhz profile for 3200mhz mode.
If 3200mhz mode is not stable, then choose 3000mhz profile for 3000mhz mode.

I wouldn't expect any problems with 3200mhz mode, if you're using 2 ram modules in proper dual channel slots.
If you're using 4 ram modules from different ram kits, then there can be issues.

 

[metju]

Choose one or the other.

Choose 3200mhz profile for 3200mhz mode.
If 3200mhz mode is not stable, then choose 3000mhz profile for 3000mhz mode.

I wouldn't expect any problems with 3200mhz mode, if you're using 2 ram modules in proper dual channel slots.
If you're using 4 ram modules from different ram kits, then there can be issues.

thank you!