[SOLVED] Drive Bay Caddys for Rajintek Asterion Plus

[TheUnknownStuntman]

Hi all. New to the forum and wondered if anyone could help. I bought a Rajintek Asterion Plus case over a year ago and want to install a 3. 5" hdd, but can't find where I put the caddys. Does anyone know where I could get replacements, or if any generic 3rd party caddys would fit. I've tried numerous searches but can't anything. I tried contacting Rajintek a little while ago, but didn't get a response (May be covid19 impacted). Any help would be greatly appreciated

 

[hang-the-9]

Manual will tell you where they go https://www.raijintek.com/images/InstallationGuide-AsterionPlus.pdf

For the brackets, case did not come with any? Maybe they are sitting in the box or other stuff that came with the case.

Going by the pictures the brackets look similar to parts that a lot of computer makers use, I have seen similar ones in many systems, maybe try one from a Dell or some other model if you can't find those specifically from the vendor, something like this https://www.ebay.com/p/2256031313?iid=283771876969

 

[TheUnknownStuntman]

Manual will tell you where they go https://www.raijintek.com/images/InstallationGuide-AsterionPlus.pdf

For the brackets, case did not come with any? Maybe they are sitting in the box or other stuff that came with the case.

Going by the pictures the brackets look similar to parts that a lot of computer makers use, I have seen similar ones in many systems, maybe try one from a Dell or some other model if you can't find those specifically from the vendor, something like this https://www.ebay.com/p/2256031313?iid=283771876969

Thanks for the reply. Much appreciated. When I bought the case I didn't check as i initially installed an m2 and a 2.5" ssd. I probably threw them out! I'll give the dell option a go. Thanks again.