Archived from groups: comp.periphs.printers (
More info?)
On Mon, 21 Feb 2005 10:34:49 +0100, Andre <no_spam@fischer-zoth.de>
wrote:
>Alan wrote:
>> On Wed, 16 Feb 2005 12:32:07 +0100, Andre <no_spam@fischer-zoth.de>
>> wrote:
>>>Does anybody have a driver for this printer? Would like to test run it
>>>with Win98SE.
>> See <http://www.tallygenicom.com/drivers/ti.htm>
>> and that leads you to
>> <http://www.tallygenicom.com/support/technotes/ti/ti-win4-01.htm>
>> "Reports indicate that the Win/4 drivers may cause conflicts with
>> Windows 98 Power Management. Customer reports indicate that disabling
>> Advanced Power Management appears to resolve these issues....The WPS
>> drivers found on the TallyGenicom site are the only drivers that will
>> function with the Win/4."
>Hi Alan!
>I found this, but there is no driver on these web sites.
>I do not need power management.
>Is there any source for the driver? Just want to give it a try.
On the first page above, <http://www.tallygenicom.com/drivers/ti.htm>,
if you look down the page there are links for
"·Legacy· microLaser Win/4", and there the "Drivers" link takes you to
<http://www.tallygenicom.com/drivers/ti/ti-mlwin4-drv.htm>
where there are English drivers at
<ftp://ftp.tallygenicom.com/pub/genicom/drivers/ti/ti_ml-win4_eng.exe>
and German at
<ftp://ftp.tallygenicom.com/pub/genicom/drivers/ti/ti_ml-win4_ger.exe>
I don't have this printer so I haven't tried them. But from the
documentation, I think these are your only choices. If they don't work
(they were originally for Win 3.1 and Win95), you have a doorstop. The
note above means you may have to turn power management off to use
them.
Facebook
Twitter
Instagram