Drivers for on board graphics for fx6300

[tshub99]

Hi!
I recently uninstalled my gpu because it wasn't working and was looking forward to use the onboard graphics for the time being. I went into the bios and switched to onboardvga but when I booted in the screen had a pretty weird resolution. When I checked into the device managers , I found that the it was using the Microsoft basic display adapter now that I had removed the nvidia driver. Is it using the right driver? Because I cannot go higher than 1024x768 when my native resolution is 1600x900. If no, then where can I download the driver for the onboard graphics for the amd fx 6300?
I think the name for the onboard graphics is atombios

 

[BadActor]

http://www.tomshardware.com/answers/id-1637688/run-6300-dedicated-gpu.html

 

[tshub99]

http://www.tomshardware.com/answers/id-1637688/run-6300-dedicated-gpu.html

Hi! Thank you for your input. It is very much evident that the fx 6300 does not have onboard graphics from your answer. So I googled my motherboard (gigabyte GA-78LMT USB3 rev6.0) and the gigabyte site said that it has Radeon hd 3000 graphics on board. I know these integrated graphics aren't super powerful but they should be a able to run my display at native resolution right? If yes then how can I switch to those instead?

 

[BadActor]

Have you downloaded and installed all the latest drivers for your motherboard? You should be able to run your native resolution.

http://www.gigabyte.com/products/product-page.aspx?pid=4602#dl

 

[tshub99]

Have you downloaded and installed all the latest drivers for your motherboard? You should be able to run your native resolution.

http://www.gigabyte.com/products/product-page.aspx?pid=4602#dl

The drivers on the site are just some USB drivers and stuff nothing related to the display adapters, which I had installed as soon as I built the pc.

 

[BadActor]

You might try running SlimDrivers and see if it offers you specific drivers for the onboard graphics. Use the link for SlimWare Utilites, not the Download.com link. (Will try to add other software)

https://www.slimwareutilities.com/slimdrivers.php

 

[tshub99]

You might try running SlimDrivers and see if it offers you specific drivers for the onboard graphics. Use the link for SlimWare Utilites, not the Download.com link. (Will try to add other software)

https://www.slimwareutilities.com/slimdrivers.php

Hi! There. I got it fixed. Since the gigabyte page said that my mobo was running an hd 3000 series integrated graphics so I went on to the amd site and downloaded and installed the driver for hd 3000 and after the install my display is working at native resolution. Anyways thanks a lot for your time.