Hey guys
Wondering if someone can shed some light for me. So recently was given a spare NVME drive and since i already had 1 plugged into my motherboard (Prime B350-Plus) I ended up buying a PCIe adapter card so that i can use the drive.
Once it was plugged in and when powering on from cold boot my machine will boot up for 2 seconds, shut down and then proceed to boot again as normal. Once in windows all drives come up but my concern is the boots > shutdowns > boots into windows.
I have tried using both PCIEX1_1 and PCIEX1_2 slots but still have the same issue. As a precaution I also did reset my bios setting to defaults but still have that same issue.
Is there some sort of setting that im missing or is this just normal behavior?
Any help would be greatly appreciated!
Wondering if someone can shed some light for me. So recently was given a spare NVME drive and since i already had 1 plugged into my motherboard (Prime B350-Plus) I ended up buying a PCIe adapter card so that i can use the drive.
Once it was plugged in and when powering on from cold boot my machine will boot up for 2 seconds, shut down and then proceed to boot again as normal. Once in windows all drives come up but my concern is the boots > shutdowns > boots into windows.
I have tried using both PCIEX1_1 and PCIEX1_2 slots but still have the same issue. As a precaution I also did reset my bios setting to defaults but still have that same issue.
Is there some sort of setting that im missing or is this just normal behavior?
Any help would be greatly appreciated!
Last edited: