Dual DVI-D to HDIM won't output a signal

[hyperGAME]

Hello,
I am using a MSI Night Elf B150M with no graphics card.
Since the board only has a Dual DVI-D port I used a DVI to HDMI converter.
But my Screen doesn't receive a signal.
Thanks i advance

 

[alexoiu]

Hi, New, or old setup? If new what other components using?

 

[hyperGAME]

Hi, New, or old setup? If new what other components using?

It's a new setup (My first actually)

Components are:
8 GB Crucial CT8G4DFD8213 RAM
Corsair CP-9020098-EU VS Series VS650 80 Plus ATX Power Supply (230V, 650W)
Kaby-Lake i5 7500
Toshiba MQ01ABD100 1000GB HDD
Sharkoon VG5-W Case

 

[alexoiu]

The board might need a BIOS update for supporting the Kaby and you can't do it without accessing the BIOS. You need a supported CPU.

 

[hyperGAME]

The board might need a BIOS update for supporting the Kaby and you can't do it without accessing the BIOS. You need a supported CPU.

You might be right, but if the new CPU isn't supported shouldn't the debug LED (CPU not detected or failed) light up?

 

[alexoiu]

Not necessarily. What are the 4 digits after B in the board's serial number (B1xxx)?

 

[hyperGAME]

Not necessarily. What are the 4 digits after B in the board's serial number (B1xxx)?

B150M

 

[alexoiu]

Not the board's model, but the serial number
http://www.msicomputer.com/msi_user/barcodeImage/MB_1.jpg

 

[hyperGAME]

The board might need a BIOS update for supporting the Kaby and you can't do it without accessing the BIOS. You need a supported CPU.

Thanks, I bought a Skylake Celeron now and I will see in about 2-3 days if it will work

 

[hyperGAME]

Not the board's model, but the serial number
http://www.msicomputer.com/msi_user/barcodeImage/MB_1.jpg

sorry my bad
B1608

 

[alexoiu]

The board does need a BIOS update. The Celeron should solve the issue.

 

[hyperGAME]

The board does need a BIOS update. The Celeron should solve the issue.

Thank you for your help

 

[alexoiu]

You're welcome.