dual M.2 EVO 960 256GB in RAID 0 not getting the speeds.. help!

Drummer1976

Distinguished
Feb 13, 2009
22
0
18,510
I have a gigabyte z170x-ud3 motherboard. It as dual m.2 slots, both x4 3.0 32gb/s. I installed 2 samsung M.2 evo 960 250BG drives, and set them up raid 0. All went well. I have them as my boot drive.

My question is, should I not be hitting the max speed of about 4gb/s read? Crystal mark and others report my highest speeds at about 3100 read. Is there something I missed? This is the theoretical speed of 1 drive.
 
Solution
Did you install the raid in bios. Are you drivers all up to date including board bios and firmware? Your board says with Intel ssd 's(I guess their flagship ones) in raid o max out at record speeds 3525 mb's read and 2840 mb's write. So your ssd's are right near the max your board will handle.

shknawe

Respectable
Oct 22, 2016
1,287
47
2,490
Did you install the raid in bios. Are you drivers all up to date including board bios and firmware? Your board says with Intel ssd 's(I guess their flagship ones) in raid o max out at record speeds 3525 mb's read and 2840 mb's write. So your ssd's are right near the max your board will handle.
 
Solution