Currently I'm running a Phenom II x2 550 at 3.4GHz OC'd. I'm using it on a MA770T-UD3P board.
My board is neither the SB710 or SB750, but Gigabyte released new bios (FC2 I believe?) that I flashed and now have the ability to enable ACC to auto, all cores etc...
However, once set to "Auto" or "All Cores", my computer boots quite normally as a dual core.
Is it safe to say the other two cores are defective? (I've heard success stories using this same board, so I didn't think the SB710 or SB750 were required). If it doesn't work, I'm fine with the quickness of the dual cores. But if I can run quad, would make my setup somewhat futureproof (for a few months..)
Thanks in advance,
dwashy
My board is neither the SB710 or SB750, but Gigabyte released new bios (FC2 I believe?) that I flashed and now have the ability to enable ACC to auto, all cores etc...
However, once set to "Auto" or "All Cores", my computer boots quite normally as a dual core.
Is it safe to say the other two cores are defective? (I've heard success stories using this same board, so I didn't think the SB710 or SB750 were required). If it doesn't work, I'm fine with the quickness of the dual cores. But if I can run quad, would make my setup somewhat futureproof (for a few months..)
Thanks in advance,
dwashy