DVD-ROM AUDIO PROBLEM

[bilina]

i have a LG8160b dvd-rom on my pc and when i play a film with powerdvd or windvd the film's audio isn't correct
there's a lots of jitter.
my soundcard is onboad(ac'97) and i have kt133via chipset with an athlon 1333?where could be problem?
p.s. if i rip the dvd and i make divx the audio is correct.
please help me!

 

[4Ryan6]

Are your DVD audio cables hooked to the proper locations on the motherboard?

You never know what you can do until you try.

 

[bilina]

yes is hooked on the same ide connector of the hd

 

[Toejam31]

Is DMA enabled for the secondary IDE channel and the devices?

Toejam31

<font color=red>First Rig:</font color=red> <A HREF="http://www.anandtech.com/mysystemrig.html?rigid=17935" target="_new"><font color=green>Toejam31's Devastating Dalek Destroyer</font color=green></A>
<font color=red>Second Rig:</font color=red> <A HREF="http://www.anandtech.com/mysystemrig.html?rigid=15942" target="_new"><font color=green>Toey's Dynamite DDR Duron</font color=green></A>
__________________________________________________________

<font color=purple>"Some push the envelope. Some just lick it. And some can't find the flap."</font color=purple>

 

[bilina]

i can't enable dma on the dvd device.
why?

 

[Toejam31]

Operating system? Perhaps some other system specifications?

Toejam31

<font color=red>First Rig:</font color=red> <A HREF="http://www.anandtech.com/mysystemrig.html?rigid=17935" target="_new"><font color=green>Toejam31's Devastating Dalek Destroyer</font color=green></A>
<font color=red>Second Rig:</font color=red> <A HREF="http://www.anandtech.com/mysystemrig.html?rigid=15942" target="_new"><font color=green>Toey's Dynamite DDR Duron</font color=green></A>
__________________________________________________________

<font color=purple>"Some push the envelope. Some just lick it. And some can't find the flap."</font color=purple>

 

[Oracle]

I believe ryan was not talking about the IDE channel but was rather referring to the actual audio cable (way smaller than IDE ribbon) that connects to the motherboard (if you have onboard sound) or the sound card (if you use a PCI card).

<font color=red>Floppy disk?!? What the heck's a floppy disk?!?</font color=red>