[SOLVED] DZ65 RGB v2 froze after windows reboot

Andy Yu

Honorable
Dec 20, 2015
43
0
10,540
Just recently built a mechanical keyboard with DZ65 RGB v2 PCB from KBDFans, it is acting mostly fine, but as soon as I reboot the keyboard froze.

The light stays in the same colour and the keys are not responding. Entering bios is fine though.
 
Solution
See if your custom keyboard exhibits the same issue on a donor system/laptop or systems/laptops. If not then you've ruled out the problem to be on your initial desktop. If the issue is found on other systems, you might want to look at how you've soldered on the switches and the quality of your soldering job.

What switches did you use? Also, did you lubricate the switches?
See if your custom keyboard exhibits the same issue on a donor system/laptop or systems/laptops. If not then you've ruled out the problem to be on your initial desktop. If the issue is found on other systems, you might want to look at how you've soldered on the switches and the quality of your soldering job.

What switches did you use? Also, did you lubricate the switches?
 
Solution