EKWB CPU Monoblock help

[ButUsername1]

I just finished up my watercooling loop and filled it with EKWB CryoFuel Red solution.

I am currently bleeding the system and I'm worried as the bubbles in the images look more like condensation then trapped air bubbles.

Before this I opened up the monoblock and cleaned the inside as I noticed weird yellow droplets on the inside but as I reassembled it I made sure to tighten the screws properly.

 

[ButUsername1]

Left the pump running for a few days straight and most of the bubbles are gone

 

[1LiquidPC]

The bubbles will disappear after a few days of use. I get them in my reservoir for a few days after a drain/fill cycle.