Elite 110 and Big suriken 2 ?

[kolvoke]

hey i am planning to get shuriken 2 with corsair sp120,.....will it fit in cooler master elite 110??

 

[cin19]

The case can support CPU cooler height = 76mm / 3 inch, http://www.coolermaster.com/case/mini-itx-elite-series/elite110/ and the shuriken 2 ( either old version or new version) has just 58mm high. http://www.scythe-eu.com/en/products/cpu-cooler/big-shuriken-2-rev-b.html

So the cooler will fit into the case.

 

[kolvoke]

The case can support CPU cooler height = 76mm / 3 inch, http://www.coolermaster.com/case/mini-itx-elite-series/elite110/ and the shuriken 2 ( either old version or new version) has just 58mm high. http://www.scythe-eu.com/en/products/cpu-cooler/big-shuriken-2-rev-b.html

So the cooler will fit into the case.

Thanks for the reply cin19.....but the thing is ...ill be adding a fan that is 25mm thick as opposed to 12mm found on shuriken heatsink.....so the total will be 71mm .....will clearance be an issue with just 5mm left?

 

[cin19]

Yes, the space is a little bit tight, and if the case has good air flow and you may not need change the fan to sp120, or use the water cooler like Cooler Master Seidon 120V, yes, it is not the best one but it will be better than shuriken 2 and it will have similar price in either UK area or USA.