"Enable AMD CorssFireX" not accessible

[Sena Gabriel]

I have recently fixed an issue where I couldn't access the AMD CrossfireX tab, but now i face another problem; My CCC says that Crossfire is disabled, and I receive the error saying "The AMD CrossfireX internal bridge interconnects linking your graphics cards together are not properly attached. Both bridge interconnects must be attached. For more information, see the user's guide for your graphics card". I have installed the bridge correctly, but i still this error. I have also uninstalled (completely) and reinstalled the drivers. I have even searched online for some time now, and no luck- all suggestions were unsuccessful. Could this be a personal hardware problem?? HELP!

 

[Sena Gabriel]

This is what it looks like:
https://www.google.com/search?q=can%27t+click+on+enable+AMD+crossfire&espv=2&biw=1680&bih=949&source=lnms&tbm=isch&sa=X&ei=oxLgVNuiNMnpoATMloDQAg&ved=0CAgQ_AUoAw#imgdii=_&imgrc=m0wXlvvhSzE9CM%253A%3BJvD6zM0d2YbJpM%3Bhttp%253A%252F%252Fi.stack.imgur.com%252Fg8yYs.png%3Bhttp%253A%252F%252Fsuperuser.com%252Fquestions%252F584332%252Fwindows-8-and-amds-catalyst-control-center-13-1-crossfire-missing%3B810%3B770

 

[SBMfromLA]

Sounds like something isn't seated properly... Let's try this (this worked for another user)... Open up your case and SWAP your card's positions... then attached the crossfire cable. It just might work.

 

[Sena Gabriel]

Yeah, thats what fixed my original problem, but now im faced with this dilemma...

 

[Sena Gabriel]

If I rearrange my cards, the other problem would arise again 🙁

 

[Sena Gabriel]

And the issue rests unsolved

 

[SBMfromLA]

Do you think it's your crossfire cable causing the problem?

 

[Sena Gabriel]

It's a possibility, but I have searched the web for the same issue, and the people with a similar problem have had no luck attempting the function with another/new Bridge 🙁

 

[Sena Gabriel]

UPDATE: I went searching in my house for another Bridge, and to my surprise, i found an unopened Crossfire Bridge in my miscellaneous cabinet. I then switched the new Bridge with the old one, and sadly, the error still occurs.

 

[Sena Gabriel]

Could it be something with the drivers of each of my cards?

 

[Sena Gabriel]

When I get home I will individually run each card in the seperate slots, and maybe even reinstall windows.