Question Enabling Intel PTT Issue

[stealthmode61]

Was in the process of enabling Intel PTT in my BIOS as part of the WIN11 requirements and found that after enabling Intel PTT my PC would not
complete the boot up sequence and started the automated Windows attempting repair sequence which fails anyway.

I found that after enabling Intel PTT BIOS setting the TPM module was detected and the information for it was listed in BIOS

I have enabled secure boot and CSM was already disabled as my boot is UEFI , would anyone have any idea why the booting up process would fail
after enabling Intel PTT?

Thanks in advance for any suggestions anyone maybe able to provide.

PC information and Boot screens below :

https://drive.google.com/file/d/1Ga4Bekud2LMX3TzksE-iL8Xon-Kt5Dxp/view?usp=sharing

https://drive.google.com/file/d/101XIE-Usfn1Euf8FrOox39PacRPVD1ox/view?usp=sharing

https://drive.google.com/file/d/1BhBuDEOUtkcMSzoihMVsSTFpmUsTGUAb/view?usp=sharing

 

[popatim]

Usually its because you logged in with a pin instead of your password.

 

[stealthmode61]

Thanks, I removed the PIN option and am getting the same results.

 

[stealthmode61]

I finally got my pc to boot after selecting to clear TPM in boot options, have to keep in mind that after first boot failure you need to go back into BIOS and to security device support where TPM information is listed then scroll down to pending operation and select clear.