[SOLVED] Enabling XMP - GPU error 43

[Pezlar]

Having a strange issue at the moment, as soon as I enable XMP my GPU dies with error code 43. As soon as I disable it everything goes back normal. Recently replaced PSU, issue was present prior to this.

 

[SkyNetRising]

What model motherboard, cpu, gpu, psu?

You replaced PSU. Did you replace all modular psu cables also?
Using wrong modular cables can damage/kill hardware connected.

 

[Pezlar]

Yeah all modular PSU cables replaced with the PSU.

MB : MSI Mag Z490 Tomahawk
CPU : i5 10600k
GPU : Gigabyte RTX 2070 8GB
PSU : Corsair RM850x

 

[SkyNetRising]

Show screenshots from CPU-Z - memory and spd sections.
(upload to imgur.com and post link)
It may be necessary to overclock ram manually.

 

[Pezlar]

Here we go my friend, appreciate the help:

https://imgur.com/a/Srj19H1

View: https://imgur.com/a/Srj19H1

 

[SkyNetRising]

Go into BIOS/Advanced DRAM settings.
Set latencies to 16-20-20-38
Command Rate to 1T
DDR Voltage to 1.35V

Set DRAM frequency to 2133mhz, test.
Increase dram frequency and test again after each step.
2400mhz,2600mhz,2800mhz,3000mhz,3200mhz.

At some point it will probably fail.
Then return to previous settings, that worked.

 

[Pezlar]

Thank you so much, up and running with 2600mhz, bit of a shame not to be able to get full speeds but better than nothing. Thank you for the help!