[SOLVED] Enabling XMP profile causes black screen ?

[Marty34_96]

Hello,

so I bought these components

• Kingston Fury Beast Black 32GB (2x16GB) DDR4 3600 CL18
• ASUS PRIME Z690-P D4 (DDR4) - Intel Z690 (support up to 3200 MHz (up 5333 MHz OC)
• Intel Core i5-12600K (support up to 3200mhz)

Default it runs at 2400MHz. When I enable XMP in quick menu I can see 3600mhz, but it goes to black screen after first restart. When I click advanced, I can see also XMP profile 3000mhz (it runs fine), but when I try something higher, it goes black again. Maximum voltage from manufacturer is 1.35V, both XMP profile are also set at 1.35V.

Where can be the problem?

 

[Colif]

Have you got the newest bios version on motherboard?
Have Kingston tested that ram with the motherboard? Is it on mb makers qlv list? normally doesn't matter so much with Intel but maybe.

if Kingston or MB maker haven't tested ram at 3200, it could be why it doesn't work.

its running cl16 at 3000 so thats faster than it does at 3600 (cl18), not sure how much difference would be really.

 

[Marty34_96]

Yes its in qlv list. Bios is newest 9/2021. Maybe i will try reseat and put just one module each.

 

[Marty34_96]

Ok problem was fixed as Asus mentioning in manual that recommended seats are A2/B2 and I had it in A1/B1, jesus. Now it works 3600mhz without problem.